Sharp MX-2010U Installation Manual page 110

G. Punch position label attachment
1) Attach the punch position label (for the scanner).
No clearance
Second label
First label
Fit with the corner R.
Label attachment reference Fit with the corner R.
* Corner of the upper
cabinet bottom
2) Attach the punch position label (for the RSPF).
R2.5 line of tangency
H. Turn on the power of the main unit
1) Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
Ridge line R2.5
MX-3610N MX-PNX5A/B/C/D (PUNCH MODULE) 25 – 4