Parksense® Front And Rear Park Assist - Dodge RAM 1500 User Manual

Heated Mirrors
The mirrors are heated to melt frost or ice. This feature is activated whenever you turn
on the defroster.
PARKSENSE® FRONT AND REAR PARK ASSIST
ParkSense can be enabled and disabled by pressing the ParkSense
®
below the climate controls, on the switch panel.
The four ParkSense
behind the vehicle that is within the sensors' field of view. The sensors can detect
obstacles from approximately 12 in (30 cm) up to 79 in (200 cm) from the rear
fascia/bumper in the horizontal direction, depending on the location, type and
orientation of the obstacle.
The six ParkSense
®
front of the vehicle that is within the sensors' field of view. The sensors can detect
obstacles from approximately 12 in (30 cm) up to 47 in (120 cm) from the front
fascia/bumper in the horizontal direction, depending on the location, type and
orientation of the obstacle.
When an object is detected within 2 meters behind the rear bumper while the vehicle
is in REVERSE, a warning will display in the Electronic Vehicle Information Center
(EVIC) or Driver Information Display (DID). In addition a chime will sound (when
Sound and Display is selected from the Customer Programmable Features section of
the Uconnect System screen). As the vehicle moves closer to the object, the chime
®
rate will change from single 1/2 second tone (for rear only), to slow (for rear only), to
fast, to continuous.
Refer to your Owner's Manual on the DVD for further details.
Cleaning The ParkSense® Sensors
If "PARKSENSE UNAVAILABLE WIPE REAR SENSORS" or "PARKSENSE UNAVAIL-
ABLE WIPE FRONT SENSORS" appears in the "Electronic Vehicle Information
Center (EVIC) or Driver Information Display (DID)", clean the ParkSense
with water, car wash soap and a soft cloth. Do not use rough or hard cloths. Do not
scratch or poke the sensors. Otherwise, you could damage the sensors.
O P E R A T I N G Y O U R V E H I C L E
sensors, located in the rear fascia/bumper, monitor the area
®
sensors, located in the front fascia/bumper, monitor the area in
switch located
®
sensors
®
55