Page 2 If you are the first registered retail owner of your vehicle, you may obtain a complimentary printed copy of the Owner’s Manual, Navigation/Media Center Manuals or Warranty Booklet by calling 1-866-726-4636 (U.S.) or 1-800-387-1143 (Canada) or by contacting your dealer. IMPORTANT This User Guide is intended to familiarize you with the important features of your vehicle.
Page 3: Table Of Contents
TABLE OF CONTENTS INTRODUCTION/WELCOME Uconnect™ ACCESS (Available on Uconnect™ 8.4A and Uconnect™ 8.4AN) ..41 WELCOME FROM CHRYSLER Uconnect™ 3.0 ....46 GROUP LLC .
Page 4 TABLE OF CONTENTS CUSTOMER ASSISTANCE MOPAR ACCESSORIES CHRYSLER GROUP LLC CUSTOMER AUTHENTIC ACCESSORIES CENTER ....146 BY MOPAR ® ....148 CHRYSLER CANADA INC.
Page 5: Introduction/Welcome
INTRODUCTION/WELCOME WELCOME FROM CHRYSLER GROUP LLC Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. Your new Chrysler Group LLC vehicle has characteristics to enhance the driver's control under some driving conditions.
Page 6 INTRODUCTION/WELCOME WARNING! • Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal injury. • Always make sure that objects cannot fall into the driver foot well while the vehicle is moving. Objects can become trapped under the brake pedal and accelerator pedal causing a loss of vehicle control.
Page 7 If your symptoms persist, please see an authorized dealer. CHRYSLER, DODGE, JEEP, RAM TRUCK, SRT, ATF+4, MOPAR and Uconnect are registered trademarks of Chrysler Group LLC.
Page 8: Controls At A Glance
CONTROLS AT A GLANCE...
Page 9 CONTROLS AT A GLANCE...
Page 10: Instrument Cluster
CONTROLS AT A GLANCE INSTRUMENT CLUSTER Warning Lights - Low Fuel Warning Light - Transmission Temperature Warning Light - Charging System Light** - Seat Belt Reminder Light - Oil Pressure Warning BRAKE Light** - Brake Warning Light** - Anti-Lock Brake (ABS) - Malfunction Indicator Light** Light (MIL)**...
Page 11 CONTROLS AT A GLANCE Indicators - Turn Signal Indicators - 4WD Auto Indicator - High Beam Indicator - Electronic Stability Control (ESC) Off - Front Fog Light Indicator Indicator - Vehicle Security - Cargo Lamp On Indicator Indicator* - Door Ajar Indicator - TOW/HAUL Indicator - Electronic Speed Control - Four-Wheel Drive LOW...
Page 12: Getting Started
GETTING STARTED KEY FOB Locking And Unlocking The Doors • Press the LOCK button once to lock all the doors. Press the UNLOCK button once to unlock the driver’s door only and twice within five seconds to unlock all the doors. •...
Page 13: Keyless Enter-N-Go
GETTING STARTED KEYLESS ENTER-N-GO™ • The Keyless Enter-N-Go™ system is an enhancement to the vehicle's Key Fob. This feature allows you to lock and unlock the vehicle's door(s) without having to press the Key Fob lock or unlock buttons, as well as starting and stopping the vehicle with the press of a button.
Page 14: Remote Start
GETTING STARTED Engine Starting/Stopping Starting • With a valid Keyless Enter-N-Go™ Key Fob inside the vehicle. • Place the shift lever in PARK or NEU- TRAL. • While pressing the brake pedal, press the ENGINE START/STOP button once. If the engine fails to start, the starter will disengage automatically af- ter 10 seconds.
Page 15: Theft Alarm
GETTING STARTED WARNING! • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Monoxide (CO) which is odorless and colorless. Carbon Monoxide is poisonous and can cause you or others to be severely injured or killed when inhaled.
Page 16: Supplemental Restraint System (Srs) - Air Bags
GETTING STARTED WARNING! In a collision, you and your passengers can suffer much greater injuries if you are not buckled up properly. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly.
Page 17: Child Restraints
GETTING STARTED WARNING! • Relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly. In some collisions, the air bags won't deploy at all. Always wear your seat belts even though you have air bags.
Page 18 GETTING STARTED Installing The Lower Attachments: • The vehicle lower anchorages are round bars located at the rear of the seat cushion where it meets the seatback. The rear seat lower anchors can be readily identified by the symbol located on the seatback directly above the anchorages and are just visible when you lean into the rear seat to install the child restraint.
Page 19 GETTING STARTED ® Child Restraints Installation Sequence (Quad Cab /Crew Cab - Rear Seats) The top tether anchorages in this vehicle are tether strap loops located between the rear glass and the back of the rear seat. There is a tether strap loop located behind each seating position.
Page 20 GETTING STARTED 4. Attach the hook to the center tether strap loop (see diagram). Tighten the tether strap according to the child seat manufacturer’s instructions. NOTE: If there are child seats in both of the outboard (left and right) seating posi- tions, the tether strap hooks of both child seats should be connected to the center tether strap loop.
Page 21 GETTING STARTED 4. Attach the hook to the outboard tether strap loop (see diagram). Tighten the tether strap according to the child seat manufacturer’s instructions. Tether Strap Through Center Tether Strap Loop And Attached To Outboard Tether Strap Loop Installing Three Child Restraints: 1.
Page 22: Front Seats
GETTING STARTED • Route the tether strap to provide the most direct path for the strap between the anchor and the child seat, preferably between the head restraint posts underneath the head restraint. • Attach the tether strap hook of the child restraint to the tether anchor and remove slack in the tether strap according to the child restraint manufacturer’s instructions.
Page 23 GETTING STARTED Memory Seat • The memory seat feature allows you to save the driver's seat position (exclud- ing lumbar position), driver's outside mirror position, adjustable brake and accelerator pedals, Automatic Tem- perature Control (ATC) temperature setting and radio station preset set- tings.
Page 24: Heated/Ventilated Seats
GETTING STARTED WARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted, and you could be severely injured or killed. Only adjust a seat while the vehicle is parked.
Page 25: Heated Steering Wheel
GETTING STARTED REAR HEATED SEATS • Second row heated seat switches are located on the rear of the center con- sole. • Press the switch once to select High- level heating. Press the switch a sec- ond time to select Low-level heating. Press the switch a third time to shut the heating elements Off.
Page 26: Tilt Steering Column
GETTING STARTED TILT STEERING COLUMN • The tilt lever is located on the steering column below the turn signal lever. • Pull forward on the lever and move the steering wheel up or down as desired. • Release the lever to lock the steering wheel into position.
Page 27: Operating Your Vehicle
OPERATING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS • A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. • Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.
Page 28: Turn Signals/Wiper/Washer/High Beams Lever
OPERATING YOUR VEHICLE TURN SIGNALS/WIPER/WASHER/HIGH BEAMS LEVER Turn Signals/Lane Change Assist • Tap the lever up or down once and the turn signal (right or left) will flash three times and automatically turn off. Wipers Intermittent, Low And High Operation •...
Page 29: Headlight Switch
OPERATING YOUR VEHICLE HEADLIGHT SWITCH Automatic Headlights/Parking Lights/Headlights • Rotate the headlight switch, located on the instrument panel to the left of the steering wheel, to the first detent for parking lights and to the second detent for headlights • With the parking lights or low beam headlights on, push the headlight switch once for fog lights.
Page 30: Speed Control
OPERATING YOUR VEHICLE SPEED CONTROL • The speed control switches are located on the steering wheel. Cruise ON/OFF • Push the ON/OFF switch to activate the Speed Control. • The cruise symbol will appear on the instrument cluster to indicate the Speed Control is on.
Page 31: Eight-Speed Automatic Transmission - If Equipped
OPERATING YOUR VEHICLE Cancel • Push the CANCEL switch or apply the brakes to cancel the set speed and maintain the set speed memory. • Push the ON/OFF switch to turn the system off and erase the set speed memory. WARNING! •...
Page 32: Electronic Range Select (Ers) Operation
OPERATING YOUR VEHICLE ELECTRONIC RANGE SELECT (ERS) OPERATION • Electronic Range Select (ERS) allows you to limit the highest available trans- mission gear, and can be activated during any driving condition. When towing a trailer or operating the vehicle in off-road conditions, using ERS shift control will help you maximize both performance and engine braking.
Page 33: Electronic Range Select (Ers) Operation - 8 Speed Transmission
OPERATING YOUR VEHICLE ELECTRONIC RANGE SELECT (ERS) OPERATION – 8 SPEED TRANSMISSION • The Electronic Range Select (ERS) shift control allows the driver to limit the highest available gear when the transmission shifter switch is in the DRIVE position • You can switch between DRIVE and ERS mode at any vehicle speed.
Page 34: Automatic Temperature Control (Atc)
OPERATING YOUR VEHICLE Heated Mirrors • The mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear window defroster. AUTOMATIC TEMPERATURE CONTROL (ATC) • Press the AUTO button or AUTO soft-key. • Select the desired temperature by pushing the up or down temperature buttons for the driver or passenger.
Page 35: Parksense ® Rear Park Assist
OPERATING YOUR VEHICLE ® PARKSENSE REAR PARK ASSIST • If an object is detected behind the rear bumper while the vehicle is in REVERSE, a warning will display in the instrument cluster and a tone, that changes speed depending on the distance of the object from the bumper, will sound. ®...
Page 36: Tire Pressure Monitor System (Tpms) - 2500 Models Only
OPERATING YOUR VEHICLE TIRE PRESSURE MONITOR SYSTEM (TPMS) – 2500 MODELS ONLY Tire Light Load Inflation Switch Description • The Tire Pressure Monitoring System on your vehicle has two different tire pressure settings based on vehicle loading. The Tire Light Load Switch is located on the Instrument Panel above the climate controls.
Page 37: Power Sliding Rear Window
OPERATING YOUR VEHICLE POWER SLIDING REAR WINDOW • The switch for the power sliding rear window is located on the overhead con- sole. • Push the switch right to open the glass and pull the switch left to close the glass.
Page 38 OPERATING YOUR VEHICLE Pinch Protection Feature • This feature will detect an obstruction in the opening of the sunroof during Express Close operation. If an obstruction in the path of the sunroof is detected, the sunroof will automatically retract. Remove the obstruction if this occurs. Next, press the switch forward and release to Express Close.
Page 39: Wind Buffeting
OPERATING YOUR VEHICLE WIND BUFFETING • Wind buffeting can be described as a helicopter-type percussion sound. If buffeting occurs with the rear windows open, adjust the front and rear windows together. • If buffeting occurs with the sunroof open, adjust the sunroof opening, or adjust any window.
Page 40: Electronics
ELECTRONICS YOUR VEHICLE'S SOUND SYSTEM...
Page 41 ELECTRONICS...
Page 42: Identifying Your Radio
ELECTRONICS IDENTIFYING YOUR RADIO Uconnect™ 3.0 • 3” Touch-Screen • Two hard-keys on either side of the display Uconnect™ 5.0 • 5” Touch-Screen • Three hard-keys on either side of the display Uconnect™ 8.4A NOTE: The 8.4A and 8.4AN appearance is the same, but the listed features provide the differences.
Page 43: Uconnect™ Access (Available On Uconnect™ 8.4A And Uconnect™ 8.4An)
ELECTRONICS Uconnect™ 8.4AN NOTE: The 8.4A and 8.4AN appearance is the same, but the listed features provide the differences. • 8.4” Touch-Screen • Navigation Standard • Hands-free/Bluetooth ® • USB port, AUX port and SD Card slot standard • Touch-screen Climate Controls •...
Page 44 ELECTRONICS 4. You will receive a secured registration email from Uconnect™ Access containing a link for completing your Uconnect™ Access Registration on-line. For security reasons, this email link will be valid for 24 hours. 5. Follow the link to complete the final step of registration and to begin using Uconnect™...
Page 45 ELECTRONICS Roadside Assistance (if equipped): • If your vehicle is equipped with this feature and within cellular range, you may be able to connect to Roadside Assistance, Uconnect™ Care and Vehicle Care by pressing the “Assist” button on the Rearview Mirror of your vehicle. To the extent any such calls incur additional costs you are responsible for them.
Page 46 ELECTRONICS Using Uconnect™ Access Features Getting Started with Apps Get started with your Uconnect™ Access apps by pressing the Apps soft-key on the bottom of your radio screen. Available apps and features are grouped by 5 tabs on the left of the screen. •...
Page 47 ELECTRONICS Managing Your Uconnect™ Account You can manage your Uconnect™ account by going to www.MoparOwnerConnect.com which is where your Uconnect™ account is stored. Once there, the following is among the available features: • Dashboard – set up your connected vehicles (remote functions, information, HELP/FAQ, Uconnect™...
Page 48: Uconnect™ 3.0
ELECTRONICS Uconnect™ 3.0 Clock Setting 1. Press the Menu button at the bottom of the radio, next select the Time Format setting and then select Set Time. 2. Adjust the hours or minutes by turning the Tune/Scroll knob, then pressing the Enter/Browse button to move to the next entry.
Page 49 ELECTRONICS Store Radio Presets • The Presets are available for all Radio Modes, and are activated by touching any of the six Preset buttons. • When you are receiving a station that you wish to commit into memory, press and hold the desired numbered button for more that 2 seconds or until you hear a confirmation beep.
Page 50: Uconnect™ 5.0
ELECTRONICS Uconnect™ 5.0 Clock Setting 1. Press the More hard-key on the right side of the display, next press the Time soft-key and then press the Set soft-key. OR Press the Settings hard-key on the right side of the display, then press the Clock soft-key. The Time setting screen is displayed and the clock can be adjusted as described in the following procedure.
Page 51 ELECTRONICS Equalizer • Touch the Equalizer soft-key to adjust the Bass, Mid and Treble. Use the + or - soft-key to adjust the equalizer to your desired settings. Press the back arrow soft-key when done. Balance/Fade • Touch the Balance/Fade soft-key to adjust the sound from the speakers. Use the arrow soft-key to adjust the sound level from the front and rear or right and left side speakers.
Page 52 ELECTRONICS • Disc Mode is entered by either inserting a Disc or by touching the Media hard-key located on the side of the display. Once in Media Mode, touch the source soft-key and select Disc. Seek Up/Down Buttons • Press to seek through Disc tracks. •...
Page 53: Uconnect™ 8.4A
ELECTRONICS Uconnect™ 8.4A Uconnect™ 8.4A AT A GLANCE Displaying the Time • If the time is not currently displayed on the radio or player main page, touch the Settings soft-key or the Apps soft-key and then the Settings soft-key. In the Settings list, touch the Clock soft-key then touch the check box next to Show Time in Status Bar.
Page 54 ELECTRONICS Audio Settings • Touch of the Audio soft-key to activate the Audio settings screen to adjust Balance\Fade, Equalizer, and Speed Adjusted Volume. • You can return to the Radio screen by touching the X located at the top right. Balance/Fade •...
Page 55 ELECTRONICS Selecting Radio Stations • Touch the desired radio band (AM, FM or SAT) soft-key. Seek Up/Seek Down • Touch the Seek arrow soft-keys for less than two seconds to seek through radio stations. • Touch and hold either arrow soft-key for more than two seconds to bypass stations without stopping.
Page 56 ELECTRONICS Jump • Automatically tells you when Traffic & Weather for a favorite city is available, and gives you the option to switch to that channel. Touch Jump to activate the feature. After listening to Traffic and Weather, touch Jump again to return to the previous channel.
Page 57 ELECTRONICS Replay • Lets you replay up to 44 minutes of the content of the current SiriusXM™ channel. Replay Option Description Option Play/Pause Touch to Pause content playback. Touch Pause/Play again to resume playback. Rewind/RW Rewinds the channel content in steps of 5 seconds. Touch and hold to rewind continuously, then release to begin playing content at that point.
Page 58 ELECTRONICS Audio Jack • The Audio Jack allows a portable device, such as an MP3 player or a cassette player, to be plugged into the radio and utilize the vehicle’s sound system, using a 3.5 mm audio cable, to amplify the source and play through the vehicle speakers. •...
Page 59 ELECTRONICS ® Bluetooth Streaming Audio • If equipped with Uconnect™ Voice Command, your Bluetooth-equipped iPod ® devices, cell phones or other media players, may also be able to stream music to your vehicle's sound system. Your connected device must be Bluetooth-compatible, and paired with your Uconnect Touch ®...
Page 60 ELECTRONICS NAVIGATION (DEALER-INSTALLED OPTION) • Your Uconnect™ 8.4A is “Navigation-Ready”, and can be equipped with Naviga- tion at an extra cost. See your dealer for details. • The information in this section is only applicable if the feature has been equipped. If so equipped, you will see a Nav soft-key at the bottom of the touch-screen.
Page 61 ELECTRONICS • Touch Done. • Select your destination and touch Yes. Entering a Destination Address • From the main Navigation menu, touch Where To?, then touch Address. • Follow the on-screen prompts to enter the address and touch Yes. Setting Your Home Location •...
Page 62 ELECTRONICS Adding a Stop • To add a stop you must be navigating a route. • Touch the Menu soft-key to return to the Main Navigation menu. • Touch Where To?, then search for the extra stop. When another location has been selected, you can choose to cancel your previous route, add as the first destination or add as the last destination.
Page 63 ELECTRONICS Start pairing procedure on mobile phone • Search for available devices on your Bluetooth enabled mobile phone. This is ® usually within Settings or Options under “Bluetooth”. See your mobile phone’s manual for details. • When your phone finds the system, select “Uconnect” as the paired device. Complete the pairing procedure •...
Page 64 ELECTRONICS Common Phone Commands (Examples) • “Call John Smith” • “Call John Smith mobile” • “Dial 1 248 555 1212 • “Call Emergency” • “Call Towing Assistance” • “Redial” Phonebook • Uconnect™ radios will automatically download your phonebook from your paired phone, if this feature is supported by your phone.
Page 65 ELECTRONICS SMS (Text Messaging) • Uconnect™ Phone can read or send new text messages on your mobile phone. • Your mobile phone must support SMS over Bluetooth in order to use this feature. ® If the Uconnect™ Phone determines your phone is not compatible with SMS messaging over Bluetooth ®...
Page 66 ELECTRONICS Changing The Volume • Start a dialogue by pressing the Voice Command button , then say a command (for example, “help”). • Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level while the Voice Command system is speaking. The volume setting for Voice Command is different than the audio system.
Page 67: Uconnect™ 8.4An
ELECTRONICS Uconnect™ 8.4AN Uconnect™ 8.4AN AT A GLANCE Displaying the Time • If the time is not currently displayed on the radio or player main page, touch the Settings soft-key or the Apps soft-key and then the Settings soft-key. In the Settings list, touch the Clock soft-key then touch the check box next to Show Time in Status Bar.
Page 68 ELECTRONICS Audio Settings • Touch of the Audio soft-key to activate the Audio settings screen to adjust Balance\Fade, Equalizer, and Speed Adjusted Volume. • You can return to the Radio screen by touching the X located at the top right. Balance/Fade •...
Page 69 ELECTRONICS RADIO • To access the Radio mode, touch the Radio soft-key at the lower left of the screen. Selecting Radio Stations • Touch the desired radio band (AM, FM or SAT) soft-key. Seek Up/Seek Down • Touch the Seek arrow soft-keys for less than two seconds to seek through radio stations.
Page 70 ELECTRONICS SiriusXM™ SATELLITE RADIO • SiriusXM™ Satellite Radio gives you over 130 channels, including 100% commercial-free music from nearly every genre, plus all your favorite sports, news, talk and entertainment channels – all with crystal clear, coast-to-coast coverage, all in one place and all at your fingertips. •...
Page 71 ELECTRONICS Browse • Lets you browse the SiriusXM™ channel listing, Favorites, Genres, Game Zone, and Weather channels. Jump setting, and also provides the SiriusXM™ channel list. Browse contains many sub-menus. Browse Sub-Menu Description Sub-Menu Shows the channel listing. Genre Provides a list of all genres, and lets you jump to a channel within the selected genre.
Page 72 ELECTRONICS MEDIA HUB – PLAYING iPod/USB/MP3 DEVICES • There are many ways to play music from iPod /MP3 players or USB devices ® through your vehicle's sound system. Audio Jack • The Audio Jack allows a portable device, such as an MP3 player or a cassette player, to be plugged into the radio and utilize the vehicle’s sound system, using a 3.5 mm audio cable, to amplify the source and play through the vehicle speakers.
Page 73 ELECTRONICS NOTE: • When connecting your iPod ® device for the first time, the system may take several minutes to read your music, depending on the number of files. For example, the system will take approximately 5 minutes for every 1000 songs loaded on the device.
Page 74 ELECTRONICS ® iPod /CD/AUX CONTROLS • The iPod ® /CD/AUX controls are accessed by touching the desired soft-key dis- played on the side of the screen and choose between Disc, AUX, iPod ® , Bluetooth or SD Card. NOTE: Uconnect™ Access will usually automatically switch to the appropriate mode when something is first connected or inserted into the system.
Page 75 ELECTRONICS NAVIGATION • Touch the Nav soft-key in the menu bar to access the Navigation system. Changing the Navigation Voice Prompt Volume 1. Touch the View Map soft-key from the Nav Main Menu. 2. With the map displayed, touch the Settings soft-key in the lower right area of the screen.
Page 76 ELECTRONICS Entering a Destination Address • From the main Navigation menu, touch Where To?, then touch Address. • Follow the on-screen prompts to enter the address and touch Yes. NOTE: Destination entry is not available while your vehicle is in motion. However, you can also use Voice Commands to enter an address while moving.
Page 77 ELECTRONICS • Your route is marked with a blue line on the map. If you depart from the original route, your route is recalculated. A speed limit icon could appear as you travel on major roadways. Adding a Stop • To add a stop you must be navigating a route. •...
Page 78 ELECTRONICS Uconnect™ Phone (Bluetooth® HANDS FREE CALLING) • If the Uconnect™ Phone Button exists on your steering wheel, then you have the Uconnect™ Phone features. • The Uconnect™ Phone is a voice-activated, hands-free, in-vehicle communica- tions system with Voice Command Capability (see Voice Command section). •...
Page 79 ELECTRONICS Making A Phone Call • Press the Uconnect™ Phone button • (After the BEEP), say “dial” then the number (or “call” then the name as listed in your phone; see Phonebook). NOTE: You can also initiate a call by using the touch-screen on the Phone main screen. Receiving A Call –...
Page 80 ELECTRONICS Voice Command Tips • Use longer names that are less easily mistaken for others. For example, say “Call John Doe” instead of “Call John”. • You can “chain” commands together for faster results. Say “Call John Doe, mobile”, for example. •...
Page 81 ELECTRONICS Uconnect™ VOICE COMMAND • If the Uconnect™ Voice Command button exists on your steering wheel, then you have the Voice Command feature. • The Voice Command feature lets you keep your hands on the steering wheel, and your eyes on the road. •...
Page 82 ELECTRONICS NOTE: • For the shortened SiriusXM™ Satellite Radio mode commands to be recognized you must be in that mode. For example, if you are in SiriusXM™ Satellite Radio mode you can say “39”, but if you are not in SiriusXM™ mode, you would need to say “Tune to Satellite Channel 39.”...
Page 83: Steering Wheel Audio Controls
ELECTRONICS WARNING! Any voice commanded system should be used only in safe driving conditions following applicable laws regarding phone use. All attention should be kept on the roadway ahead. Failure to do so may result in a collision causing you and others to be severely injured or killed.
Page 84: Programmable Features
ELECTRONICS • Press and release the RIGHT button for access to main menus, sub menus or to select a personal setting in the setup menu. Press and hold the RIGHT button for two seconds to reset features • Press the LEFT button to scroll back to a previous menu or sub menu.
Page 85 ELECTRONICS Trip A • Press and release the UP or DOWN arrow button until the Trip A icon is highlighted in the EVIC. Press and release the RIGHT arrow button to display the Trip A information. Trip B • Press and release the UP or DOWN arrow button until the Trip B icon is highlighted in the EVIC.
Page 86: Universal Garage Door Opener (Homelink )
ELECTRONICS ® UNIVERSAL GARAGE DOOR OPENER (HomeLink • HomeLink replaces up to three hand-held transmitters that operate devices such ® as garage door openers, motorized gates, lighting or home security systems. The HomeLink ® unit is powered by your vehicles 12 Volt battery. •...
Page 87 ELECTRONICS 3. Simultaneously press and hold both the Homelink ® button you want to program and the hand-held transmitter button. 4. Continue to hold buttons until the EVIC display changes from “CHANNEL # TRAINING” to “CHANNEL # TRAINED”, then release both buttons. NOTE: If the EVIC displays “DID NOT TRAIN”...
Page 88: Power Inverter
ELECTRONICS ® Using HomeLink • To operate, press and release the programmed HomeLink ® button. Activation will now occur for the programmed device (i.e., garage door opener, gate operator, security system, entry door lock, home/office lighting, etc.,). The hand-held transmitter of the device may also be used at any time. WARNING! •...
Page 89: Power Outlets
ELECTRONICS WARNING! To Avoid Serious Injury or Death: Do Not • use a three-prong adaptor. • insert any objects into the receptacles. • touch with wet hands. Close the lid when not in use. If this outlet is mishandled, it may cause an electric shock and failure.
Page 90: Off-Road Capabilities
OFF-ROAD CAPABILITIES FOUR WHEEL DRIVE OPERATION Four-Position Transfer Case • The transfer case provides four mode positions: • Two-wheel drive high range (2WD) • Four-wheel drive high range (4WD LOCK) • NEUTRAL (N) • Four-wheel drive low range (4WD LOW) •...
Page 91 OFF-ROAD CAPABILITIES • This electronically shifted transfer case is designed to be driven in the two-wheel drive position (2WD) or four-wheel drive position (4WD AUTO) for normal street and highway conditions on dry, hard-surfaced roads. • Driving the vehicle in 2WD will have greater fuel economy benefits as the front axle is not engaged in 2WD.
Page 92 OFF-ROAD CAPABILITIES Shifting Procedure • Shifting between 2WD and 4WD AUTO or 4WD LOCK can be made with the vehicle stopped or in motion at speeds up to 55 mph (88 km/h). • Shifting between 2WD, 4WD AUTO and 4WD LOCK into 4WD LOW must be made with the transmission in NEUTRAL and the vehicle stopped or rolling at 2 to 3 mph (3 to 5 km/h).
Page 93: Utility
UTILITY EASY-OFF TAILGATE • To simplify mounting of a camper unit with an overhang, the tailgate can be removed. NOTE: If your vehicle is equipped with a rear camera the electrical connector must be disconnected prior to removing the tailgate. Removing the Tailgate •...
Page 94: Pickup Box
UTILITY PICKUP BOX • You can carry wide building materials (sheets of plywood, etc.) by building a raised load floor. Place lumber across the box in the indentations provided above the wheel housings and in the bulkhead dividers to form the floor. •...
Page 95: Rambox
UTILITY ® RAMBOX • The RamBox system is an integrated pickup box storage and cargo management ® system consisting of three features: • Integrated box side storage bins • Cargo extender/divider • Bed rail tie-down system...
Page 96 UTILITY NOTE: If you are installing a Toolbox, Ladder Rack or Headache Rack at the front of the Pickup Box, you must use Mopar Box Reinforcement Brackets that are available from your authorized dealer. RamBox® Integrated Box Side Storage Bins •...
Page 97 UTILITY Storage Position • The storage position for the bed extender is at the front of the truck bed. • To install the bed extender into the storage position, perform the following: • Make sure the center handle is unlocked using the vehicle key and rotate the center handle vertically to release the extender side gates.
Page 98 UTILITY Bed Rail Tie-Down System • There are two adjustable cleats on each side of the bed that can be used to assist in securing cargo. • Each cleat must be located and tightened down in one of the detents, along either rail, in order to keep cargo properly secure.
Page 99 UTILITY WARNING! • Always close the storage bin covers when your vehicle is unattended or in motion. • Do not allow children to have access to the storage bins. Once in the storage bin, young children may not be able to escape. If trapped in the storage bin, children can die from suffocation or heat stroke.
Page 100: Towing & Payload
UTILITY TOWING & PAYLOAD Ram 1500 4x2 SLT/Outdoorsman/ Laramie Sport 3.6L V-6 8–Speed Towing: 3750 lbs - max Payload: Automatic — — 1860 lbs - max Transmission Towing: 5000 lbs - Towing: 5000 lbs - 4.7L V-8 6–Speed std 7600 lbs - max...
Page 101: Tow/Haul Mode
UTILITY TOW/HAUL MODE • When driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting occurs, press the TOW/HAUL switch to select TOW/HAUL mode. This will improve performance and reduce the potential for transmission overheating or failure due to excessive shifting. When operating in TOW/HAUL mode, transmission upshifts are delayed, and the transmission will automatically downshift (for engine braking) during steady braking maneuvers.
Page 102: Integrated Trailer Brake Module
• Press the RIGHT arrow and then press the UP or DOWN buttons until the proper Trailer Brake Type appears on the screen. NOTE: 1500 Models Only – Light Electric and Heavy Electric will only be available due to the tow capacities of the vehicle. GAIN Adjustment Buttons (+/-) •...
Page 103: Recreational Towing (Behind Motorhome, Etc.)
UTILITY WARNING! Connecting a trailer that is not compatible with the ITBM system may result in reduced or complete loss of trailer braking. There may be a increase in stopping distance or trailer instability which could result in personal injury. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Wheels OFF The...
Page 104 UTILITY Recreational Towing – Four-Wheel Drive Models NOTE: Both the manual shift and electronic shift transfer cases must be shifted into NEUTRAL (N) for recreational towing. Automatic transmissions must be shifted into PARK for recreational towing. Manual transmissions must be placed in gear (NOT in NEUTRAL) for recreational towing.
Page 105: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES ROADSIDE ASSISTANCE • Dial toll-free 1-800-521-2779 for U.S. Residents or 1-800-363-4869 for Canadian Residents. • Provide your name, vehicle identification number, license plate number, and your location, including the telephone number from which you are calling. •...
Page 106 WHAT TO DO IN EMERGENCIES • Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunc- tion, the telltale will flash for approximately one minute and then remain continuously illuminated.
Page 107 WHAT TO DO IN EMERGENCIES BRAKE - Brake Warning Light • The Brake Warning light illuminates when there is either a system malfunction or the parking brake is applied. If the light is on and the parking brake is not applied, it indicates a possible brake hydraulic malfunction, brake booster problem or an Anti-Lock Brake System problem.
Page 108 WHAT TO DO IN EMERGENCIES - Oil Pressure Warning Light • This light indicates low engine oil pressure. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound for four minutes when this light turns on.
Page 109: If Your Engine Overheats
WHAT TO DO IN EMERGENCIES - Fuel Cap/Loose Gas Cap EVIC Message • If a “gas cap” message (shown as gASCAP) appears, tighten the gas cap until a “clicking” sound is heard. • Press the odometer reset button to turn the message off. •...
Page 110: Jacking And Tire Changing
WHAT TO DO IN EMERGENCIES WARNING! You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator or coolant bottle is hot.
Page 111 • Remove the jack and tools by removing the wing bolt and sliding the assembly from under the seat. Reinstalling The Jack And Tools (1500 Series) 1. Lower the jack all the way down by turning the jack turn-screw until the jack is snug.
Page 112 WHAT TO DO IN EMERGENCIES 3. Fold the flap and roll the jack tool kit into a cylindrical package (in direction of arrows) and tie to the jack using the tie straps.
Page 113 WHAT TO DO IN EMERGENCIES 4. Place the jack and tools in the storage position holding the jack by the jack turn-screw, slip the jack and tools under the seat so that the bottom slot engages into the fastener on the floor, and then secure to the floor pan using the wing bolt. Reinstall the plastic cover.
Page 114 WHAT TO DO IN EMERGENCIES Preparations 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. 2. Turn on the Hazard Warning flasher. 3. Set the parking brake. 4. Place the shift lever into PARK. On four-wheel drive vehicles, shift the transfer case to the 4L position.
Page 115 WHAT TO DO IN EMERGENCIES 3. Placement of the jack: 1500 Series Trucks • When changing a front wheel, place the scissors jack under the rear portion of the lower control arm as shown below.
Page 116 WHAT TO DO IN EMERGENCIES • Operate the jack using the jack drive tube and the wheel wrench. The tube extension may be used but is not required. • For 4x2 and 4x4 trucks, when changing a rear wheel, assemble the jack drive tube to the jack and connect the drive tube to the extension tube.
Page 117 WHAT TO DO IN EMERGENCIES 2500/3500 Series Trucks • For 2500/3500 4x2 series trucks, when changing a front wheel, place the bottle jack under the frame rail behind the wheel. Locate the jack as far forward as possible on the straight part of the frame. •...
Page 118 • Using the wheel wrench, finish tightening the wheel nuts using a crisscross pattern. The correct wheel nut tightness is 130 ft lbs (177 N·m) torque (1500 Series), 135 ft lbs (183 N·m) torque for 2500/3500 single-rear wheel (SRW) models, and 145 ft lbs (197 N·m) for 3500 dual rear-wheel models.
Page 119 WHAT TO DO IN EMERGENCIES • Lower the jack to its fully closed position. If the bottle jack will not lower by turning the dial (thumbwheel) by hand, it may be necessary to use the jack drive tube in order to lower the jack.
Page 120 WHAT TO DO IN EMERGENCIES 8-Stud — Dual Rear Wheels • Dual wheels are flat-mounted and center-piloted. The lug nuts are a two-piece assembly. When the tires are being rotated or replaced, clean these lug nuts and add two drops of oil at the interface between the hex and the washer. •...
Page 121 WHAT TO DO IN EMERGENCIES To Stow The Flat Or Spare NOTE: Vehicles equipped with aluminum wheels cannot be stored under the vehicle because the wheel retainer will not fit through the wheel pilot hole. Secure the flat tire in the bed of the truck. Have the flat tire repaired or replaced immediately. •...
Page 122 WHAT TO DO IN EMERGENCIES WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. •...
Page 123: Jump-Starting
WHAT TO DO IN EMERGENCIES JUMP-STARTING • If your vehicle has a discharged battery it can be jump-started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. • Jump-starting can be dangerous if done improperly so please follow the procedures in this section carefully.
Page 124 WHAT TO DO IN EMERGENCIES Once the engine is started, remove the jumper cables in the reverse sequence: • Disconnect the negative (-) jumper cable from the engine ground of the vehicle with the discharged battery. • Disconnect the negative end (-) of the jumper cable from the negative (-) post of the booster battery.
Page 125: Emergency Tow Hooks
WHAT TO DO IN EMERGENCIES WARNING! • When temperatures are below the freezing point, electrolyte in a discharged battery may freeze. Do not attempt jump-starting because the battery could rupture or explode and cause personal injury. Battery temperature must be brought above the freezing point before attempting a jump-start.
Page 126: Shift Lever Override
WHAT TO DO IN EMERGENCIES SHIFT LEVER OVERRIDE • If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the following procedure to temporarily move the shift lever. • Have your vehicle inspected by your local authorized dealer immediately if the shift lever override has been used.
Page 127 WHAT TO DO IN EMERGENCIES MANUAL PARK RELEASE — 8 SPEED TRANSMISSION (3.6L Engine) • In order to push or tow the vehicle in cases where the transmission will not shift out of PARK (such as a dead battery), a Manual Park Release is available. •...
Page 128 WHAT TO DO IN EMERGENCIES • Using the screwdriver or similar tool, push the Manual Park Release lever locking tab (just below the middle of the lever) to the right. • While holding the locking tab in the disengaged position, pull the tether strap to rotate the lever rearward, until it locks in place pointing towards the driver's seat.
Page 129: Towing A Disabled Vehicle
WHAT TO DO IN EMERGENCIES...
Page 130: Freeing A Stuck Vehicle
WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE • If your vehicle becomes stuck in mud, sand or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels.
Page 131: Event Data Recorder (Edr)
WHAT TO DO IN EMERGENCIES EVENT DATA RECORDER (EDR) • This vehicle is equipped with an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed.
Page 132: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE OPENING THE HOOD • Pull the hood release lever located be- low the steering wheel at the base of the instrument panel. • Reach into the opening beneath the center of the hood and move the safety latch lever while lifting the hood at the same time.
Page 133: Engine Compartment
MAINTAINING YOUR VEHICLE...
Page 134 MAINTAINING YOUR VEHICLE...
Page 135 MAINTAINING YOUR VEHICLE...
Page 136: Fluids And Capacities
® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). Engine Coolant 5.7L We recommend you use 16 Quarts (15 Liters) 1500 Models MOPAR ® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). Engine Coolant 5.7L We recommend you use 18.7 Quarts (17.7 Liters)
Page 137 Drive Models MS-9763. We recommend you use MOPAR Synthetic Gear ® Lubricant SAE 75W-140 MS-8985. Limited-Slip Rear Axle 1500 Models — Rear Axles require the addition of 118 ml (4 oz) of MOPAR ® Limited Slip Additive MS-10111. We recommend you use...
Page 138: Maintenance Schedule
MAINTAINING YOUR VEHICLE Component Fluid, Lubricant, or Capacities Genuine Part Fuel Selection 3.6L, 4.7L 87 Octane 1500 Regular Cab Shortbed/Crew Quad Cab - 26 Gallons (98 Liters) (Approximate) 1500 Regular Cab Longbed/Crew Quad Cab (Optional) - 32 Gallons (121 Liters) (Approximate)
Page 139 MAINTAINING YOUR VEHICLE and E85 fuel usage will influence when the “Oil Change Required” message is displayed. Severe Operating Conditions can cause the change oil message to illuminate as early as 3,500 miles (5,600 km) since last reset. Have your vehicle serviced as soon as possible, within the next 500 miles (805 km).
Page 140 MAINTAINING YOUR VEHICLE...
Page 141 MAINTAINING YOUR VEHICLE...
Page 142: Maintenance Record
MAINTAINING YOUR VEHICLE MAINTENANCE RECORD Odometer Date Signature, Authorized Service Center 20,000 Miles (32,000 km) or 2 Years 30,000 Miles (48,000 km) or 3 Years 40,000 Miles (64,000 km) or 4 Years 50,000 Miles (80,000 km) or 5 Years 60,000 Miles (96,000 km) or 6 Years 70,000 Miles...
Page 143: Fuses
MAINTAINING YOUR VEHICLE FUSES Integrated Power Module (fuses)
Page 144 MAINTAINING YOUR VEHICLE The Integrated Power Module is located in the engine compartment near the battery. This center contains cartridge fuses and mini fuses. A description of each fuse and component may be stamped on the inside cover, otherwise the cavity number of each fuse is stamped on the inside cover that corresponds to the following chart.
Page 145 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini Fuse Description 20 Amp Yellow Main #2 Instrument Cluster/ Wireless Control Module/ITM/Siren/ Multifunction Switch (Steering Column Module) 20 Amp Yellow Back Up Camera (Domestic Only) 20 Amp Yellow Power Seat Module(s)/Audio Telematics/Daytime Running Lights Relay/Instrument Cluster/Transfer Case Module 10 Amp Red...
Page 146: Tire Pressures
MAINTAINING YOUR VEHICLE CAUTION! • When installing the integrated power module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the integrated power module, and possibly result in a electrical system failure.
Page 147: Wheel And Wheel Trim Care
MAINTAINING YOUR VEHICLE WHEEL AND WHEEL TRIM CARE • All wheels and wheel trim, especially aluminum and chrome plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. • To remove heavy soil and/or excessive brake dust, use MOPAR ®...
Page 148: Customer Assistance
CUSTOMER ASSISTANCE CHRYSLER GROUP LLC CUSTOMER CENTER P.O. Box 21–8004 Auburn Hills, MI 48321–8004 Phone: 1–866–726–4636 CHRYSLER CANADA INC. CUSTOMER CENTER P.O. Box 1621 Windsor, Ontario N9A 4H6 Phone: 1–800–465–2001 (English) Phone: 1–800–387–9983 (French) ASSISTANCE FOR THE HEARING IMPAIRED • To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommunication Devices for the Deaf) equipment at its customer center.
Page 149: Reporting Safety Defects In The 50 United States And Washington, D.c
• A street address is required when ordering manuals (no P.O. Boxes). • The Owner's Manual and User Guide electronic files are also available on the Chrysler, Jeep, Ram Truck and Dodge websites. • Click on the "For Owners" tab, select "Owner/Service Manuals", then select your desired model year and vehicle from the drop down lists.
Page 150: Mopar Accessories
MOPAR ACCESSORIES ® AUTHENTIC ACCESSORIES BY MOPAR • The following highlights just some of the many Authentic Ram Truck Accessories by Mopar featuring a fit, finish, and functionality specifically for your Ram Truck. • In choosing Authentic Accessories you gain far more than expressive style, premium protection, or extreme entertainment, you also benefit from enhancing your vehicle with accessories that have been thoroughly tested and factory- approved.
Page 151: Index
INDEX Adjustable Pedals ...24 Electronic Range Select (ERS) ..30, 31 Airbag ....14 Electronics Air Conditioning .
Page 152 INDEX HomeLink ® (Garage Door Opener) . .84 Power Hood Release ... . .130 Glass Sunroof ...35 Hub Caps ....117 Inverter .
Page 153 INDEX Tires Transmission Fluid ....134 Air Pressure ...144 Warning Light ..106 Changing .
Page 154: Faq
FREQUENTLY ASKED QUESTIONS GETTING STARTED • How do I install my LATCH Equipped Child Seat? Pg. 15 • How do I program my Front Seat Memory? Pg. 21 OPERATING YOUR VEHICLE • How does the Electronic Range Select (ERS) operate? Pg. 30 •...
Page 155 NOTES OFF-ROAD CAPABILITIES • How do I shift into different four-wheel drive selections? Pg. 88 UTILITY • How do I know how much I can tow with my Ram Truck? Pg. 101 • How do I adjust the gain on the Integrated Trailer Brake Module? Pg. 100 WHAT TO DO IN EMERGENCIES •...
Page 156 NOTES...
Page 157 NOTES...
Page 158 NOTES...
Page 159 NOTES...
Page 160 NOTES...
Page 161 NOTES...
Page 162 NOTES...
Page 163: Driving And Alcohol
This guide has been prepared to help you get quickly acquainted with your new RAM and to provide a convenient reference source for common questions. However, it is not a substitute for your Owner’s Manual. For complete operational instructions, maintenance procedures and important safety messages, please consult your Owner’s Manual, Navigation/Media Center Manuals, Multimedia User Manual and other Warning Labels in your vehicle.
Page 164 App store to download a Microsoft Tag reader, like the free one at www.gettag.mobi. Then follow the directions to scan the code. U.S. Only Get the free mobile app for your phone http://gettag.mobi 13D241-926-AA RAM Trucks 1500/2500/3500 First Edition User Guide...

This manual is also suitable for:

2500 3500 2013 ram 1500 2013 ram 2500 2013 ram 3500

Dodge 1500 User Manual

Introduction/Welcome

Controls at a Glance

Getting Started

Operating Your Vehicle

Off-Road Capabilities

Utility

What to Do in Emergencies

Customer Assistance

Mopar Accessories

Index

Faq

Quick Links

Related Manuals for Dodge 1500

Summary of Contents for Dodge 1500

This manual is also suitable for:

Table of Contents