Dodge RAM 1500 User Manual page 87

Clock Setting
To start the clock setting procedure, perform the following:
1. Push the SETTINGS button on the faceplate on the right side of the display, then
press the "Clock & Date" button on the touchscreen.
2. Press the "Set Time & Format" button on the touchscreen.
3. Press the "Up" or "Down" arrows to adjust the hours or minutes, next select the
"AM" or "PM" button on the touchscreen. You can also select 12hr or 24hr
format by pressing the desired button on the touchscreen.
4. Once the time is set press the "Done" button on the touchscreen to exit the time
screen.
Equalizer, Balance And Fade
1. Push the SETTINGS button on the faceplate on the right side of the unit.
2. Then scroll down and press the "Audio" button on the touchscreen to get to the
Audio menu.
3. The Audio Menu shows the following options for you to customize your audio
settings.
Equalizer
• Press the "Equalizer" button on the touchscreen to adjust the Bass, Mid and
Treble. Use the "+" or "–" button on the touchscreen to adjust the equalizer to your
desired settings. Press the "Done" button on the touchscreen when finished.
Balance/Fade
• Press the "Balance/Fade" button on the touchscreen to adjust the sound from the
speakers. Use the "arrow" button on the touchscreen to adjust the sound level
from the front and rear or right and left side speakers. Press the Center "C" button
on the touchscreen to reset the balance and fade to the factory setting. Press the
"Done" button on the touchscreen when finished.
Speed Adjustable
• Press the "Speed Adjusted Volume" button on the touchscreen to select between
OFF, 1, 2 or 3. This will decrease the radio volume relative to a decrease in vehicle
speed. Press the "Done" button on the touchscreen when finished.
Loudness
• Press the "Loudness" button on the touchscreen to select the Loudness feature.
When this feature is activated it improves sound quality at lower volumes.
E L E C T R O N I C S
85