Dodge RAM 1500 User Manual page 145

Start Pairing Procedure On Mobile Phone
• Search for available devices on your Bluetooth
usually within Settings or Options under "Bluetooth." See your mobile phone's
manual for details.
• When your phone finds the system, select "Uconnect" as the paired device. You
may be prompted by your phone to download the phonebook. This is so you can
make calls by saying the name of your contact (PBAP-Phone Book Access Profile).
Complete The Pairing Procedure
• When prompted on the phone, verify with the radio password shown on the
Uconnect Screen.
®
• If your phone asks you to accept a connection request from Uconnect
"Yes." If available, check the box telling it not to ask again – that way your phone
will automatically connect each time you start the vehicle.
Select The Mobile Phone's Priority Level
• When the pairing process has successfully completed, the system will prompt you
to choose whether or not this is your favorite phone. Selecting "Yes" will make this
phone the highest priority. This phone will take precedence over other paired
phones within range. Only one phone can be paired at a time.
• You are now ready to make hands-free calls. Press the Uconnect
your steering wheel to begin.
Making A Phone Call
To begin a phone call using Uconnect
• Push the Uconnect
• After the BEEP, say "dial" then the number (or "call" then the name as listed in
your phone; see Phonebook).
NOTE:
You can also initiate a call by using the touchscreen on the Phone main screen.
Receiving A Call — Accept (And End)
• When an incoming call rings/is announced on Uconnect
button .
• To end a call, push the Phone button
Mute (Or Unmute) Microphone During Call
• During a call, press the "mute" button on the touchscreen to mute and unmute
the call.
Voice Command:
®
Phone button
®
E L E C T R O N I C S
enabled mobile phone. This is
®
.
.
, select
®
Phone button on
®
, push the Phone
®
143