Table of Contents
Advertisement
1.3 Hardware Specifications
Standard Compliance: IEEE802.3/802.3ab / 802.3z / 802.3u / 802.3x
Network Interface:
Configuration
10/100/1000Mbps Gigabit Copper NWay
1000Base-X Gigabit Fiber
*Port 23, 24 are RJ-45/SFP fiber dual media ports with auto detected function.
*Optional SFP modules support MMF, SMF LC or BiDi LC transceiver.
Transmission Mode: 10/100Mbps support full or half duplex, 1000Mbps support full duplex only
Transmission Speed: 10/100/1000Mbps for Gigabit copper ports, 1000Mbps for Gigabit Fiber ports
Full Forwarding Packet Rate: PPS (packets per second)
Forwarding Rate Speed
1,488,000pps
1000Mbps
148,800pps
100Mbps
14,880pps
10Mbps
MAC Address and Self-learning: 8K MAC address
VLAN Table: 4K VLAN table entries
Buffer Memory: Embedded 400 KB frame buffer
Flow Control:
IEEE802.3x compliant for full duplex
Backpressure flow control for half duplex
Cable and Maximum Length:
Gigabit copper
Cat. 5 UTP cable Cat.5e recommended, up to 100m
Gigabit fiber
50/125, 60/125 MMF, 9/125 SMF, distance (depending on the SFP transceiver)
Diagnostic LED:
System LED :
Port 1 - 24 10/100/1000M : Speed status
Port 1 - 24 LINK/ACT :
Port 23, 24 SFP :
Power Requirement: Voltage 100 - 240 VAC, Frequency 50/60 Hz, Consumption 30W
Ambient Temperature: Operating 0 to 50
Dimensions: 44(H) ( 442(W) ( 209(D) mm
Approval: Comply with FCC Part 15 Class A & CE Mark Approval
Mode
Connector
RJ-45
1000 FDX SFP*
Power
Link status and activities
SFP fiber link status
o
C, Humidity 5% to 90%
-8-
Port
1 - 24
23,24(Option)
Advertisement
Table of Contents
