Table of Contents
Advertisement
Each of them will be described in detail orderly in the following sections.
System Status
Product Name:
Firmware Version:
Hardware Version:
Serial Number:
IP Address:
Subnet Mask:
Default Gateway:
MAC Address:
System Name:
Auto Logout Timer:
Ports Status
Port:
Link Status:
Speed:
Flow Control:
Aggregation
Normal:
Group 1~8:
VLAN
VLAN Mode:
ID:
Description:
VID:
Member:
Management Interface
State
VID
To show the product name of this device.
To show the firmware version of this switch.
To show the hardware version of this switch.
The serial number is assigned by the manufacturer.
To show the IP address of this switch.
To show the subnet mask of this switch.
To show the default gateway of this switch.
To show the Ethernet MAC address of this switch.
To show the special name for this switch.
To show the setting of auto-logout timer in the web UI.
Display the port number. The number is 1 - 24. Both port 23 and 24 are
optional modules.
Link Status will show the current active link speed and duplex. Otherwise,
it shows [Down].
Display Auto or Forced the speed mode.
Show each port flow control status.
Display the ports that do not join any aggregation trunking group.
Display the members of the Group.
Display Port-based, Tag-based and metro mode, which depends on the
setting in VLAN mode configuration function.
Display the Group ID.
Display the description defined by administrator is associated with a
VLAN group.
Display VLAN identifier. Each tag-based VLAN group has a unique VID.
It appears only in tag-based mode.
Display the port members belonging to each VLAN Group.
VLAN Tagging status of the switch management interface
VID used by the switch management interface
-36-
Advertisement
Table of Contents
