Baffle Removal And Replacement; Air Tube Removal And Replacement - Lopi Revere Owner's Manual

Maintaining Your Appliance
26
Baffle Removal & Replacement
1 Push the front firebricks up and feed them forward, guiding them out the door. Repeat for the rear
firebricks.
Front Air Tube
2 The baffle supports rest on support tabs.
3 The bypass support and damper are difficult to remove and should only be removed if necessary.
Remove the rear secondary air tube (see the following section for instructions). Slide the bypass
support forward until the bypass rod can be disconnected from the bypass damper. Slide the damper
forward and remove. The bypass support is removed by sliding it forward and rotating it downwards
(the bypass holder fits very snug inside the firebox and is very heavy, making it difficult to remove).
The bypass gasket rests on the side and rear air channels. Try not to damage it when removing the
bypass holder.
Air Tube Removal & Replacement
The middle and rear air tubes are identical. The front air tube is unique.
Air Tube
Travis Industries
Front Baffle Support
Support Tabs
Air Tube Collar
Push Pin
Bypass Rod (& Yoke)
Baffle Firebrick
Center Baffle Support
Remove the left pin on the air tube collar
a
(it may be a roll pin or push pin).
Roll Pin
Slide the air tube to the left, swing it
b
down and remove from the firebox.
93508132
Bypass Damper
Bypass Support
Bypass Gasket
4 020327