Firebrick Removal And Replacement Inst; Baffle Removal And Replacement Instructions - Lopi Freedom Owner's Manual

Firebrick Removal and Replacement Instructions
With the appliance cool, remove all ash from the firebox. Only the firebrick that is damaged must be
replaced. If the damaged firebrick is on the floor, it can be replaced by simply removing the firebrick in
front of it. NOTE: Do not pry firebrick to remove, this will chip or crack the firebrick. If a
firebrick on the wall of the firebox needs replacement, the floor firebrick near it will need to be removed
first. The wall firebrick is held upright by a clip on the walls of the firebox. To remove, pivot it out
from the bottom. See the illustration below.
WALL FIREBRICKS
First remove the firebricks on the floor in front of the firebrick needing replacement.
Then pivot it out from the bottom to clear the clip that holds it in place.
FIREBRICK SIZES -
All firebrick is 1 1/4" thick.
Those not labeled are 4 1/2" x 9".
Firebrick A
Firebrick B
Firebrick C
7 3/8"
4 1/2"
9"
Firebrick
D
5 1/4"
4 1/2"
6 3/4"

Baffle Removal and Replacement Instructions

The view below details the baffle components. Instructions for removal are on the following page.
M
AINTAINING
is 4 1/2" x 6 3/8".
is 1 1/2" x 9" (qty 2)
is: (qty 2)
is: (qty 2)
FLOOR FIREBRICKS
Remove the firebricks in front of the firebrick needing replacement.
Y A
OUR PPLIANCE
B
B
D
C A
(C
ONTINUED
E
CLIPS -
Hold the wall
firebrick in place.
D
C
A
)
P 23
AGE