Build To Order; Ibm Edition - IBM Power 720 Overview

Hide thumbs Also See for Power 720:
Table of Contents

Advertisement

On both systems, each processor core has access to 256 KB of L2 cache and 10 MB of L3
cache. Each processor on a single-chip module (SCM) connects to eight DDR3 memory
DIMM slots; a total of 16 DIMM slots per SCM. Each memory module is a 1066 MHz DIMM,
and is delivered in pairs. Memory features contain two memory DIMMs per feature code;
features range from 4 GB to 32 GB per feature code. See Table 1-17.
Table 1-17 Summary of processor core counts, core frequencies, and L3 cache sizes
System
Power 720
Power 740
Power 740
Power 740
a. The total L3 cache available on the POWER7+ SCM, maintaining 10 MB per processor core

1.8 Build to order

You can perform a build-to-order or
for e-business (e-config), where you specify each configuration feature that you want on
the system.
Preferably, begin with one of the available starting configurations, such as the IBM Edition.
These configurations are available at initial system-order time with a starting configuration
that is ready to run as is.

1.9 IBM Edition

IBM Edition is available only as an initial order. If you order an IBM Edition as defined here,
you can qualify for half the initial configuration's processor core activations at no additional
charge.
The total memory (based on the number of cores) and the quantity and size of disk, SSD
drives, Fibre Channel adapters, or Fibre Channel over Ethernet (FCoE) adapters shipped
with the server are the only features that determine if you are entitled to a processor
activation at no additional charge.
With an IBM Edition for a Power 720, processor activations for the processor card options are
as follows:
3.6 GHz 4-core processor module (FC EPCK) with 2 x FC EPDK (chargeable) and
2 x FC EPEK (no-charge)
3.6 GHz 6-core processor module (FC EPCL) with 3 x FC EPDL (chargeable) and
3 x FC EPEL (no-charge)
3.6 GHz 8-core processor module (FC EPCM) with 4 x FC EPDM (chargeable) and
4 x FC EPEM (no-charge)
Cores per
Frequency
POWER7+ SCM
(GHz)
4
3.612
6
4.284
8
3.612
8
4.228
a la carte
L3 cache per
a
SCM
40 MB
60 MB
80 MB
80 MB
configuration by using the IBM configurator
Chapter 1. General description
System maximum
(cores)
8
12
16
16
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Power 740

Table of Contents