JVC LT-26D50BJ Instructions Manual page 60

LT-32&26D50BJSJ_Eng.book Page 60 Thursday, October 7, 2004 4:42 PM
SET UP menu
ID LIST
You can store a name for each of the devices
connected to each EXT terminal. Giving a
name to an EXT terminal makes the EXT
terminal number appear on the screen,
together with its name.
1 Press the 5 or 6 buttons to
choose an EXT terminal
2 Press the blue button to display the
name list (ID LIST)
> EXT SETTING
EXT-1
EXT-3
TV
DTV
OK
D0021-EN
3 Press the 6 buttons to choose a
name. Then press the a button
The ID LIST disappears and the name is
assigned to the EXT terminal.
• You cannot assign an EXT terminal
name not found in the name list (ID
LIST).
To erase a name assigned to the
EXT terminal:
Choose a blank space.
4 Press the a button to complete
the setting
60
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH
DUBBING ID LIST
EXT-2
VHS
S-VHS
DVC
CAM
SAT
STB
GAME
EXT-4
DVD
DVR
DUBBING
You can choose a signal source to be output
from the EXT-2 terminal.
You can do this with the output signals of the
devices connected to other EXT terminals, or
with the picture and sound from a TV
channel you are currently viewing.
Caution:
Every time you dub, check this
DUBBING setting beforehand.
This setting may change
automatically when "Timers (DTV
Timer Recording)" or "Direct Rec" of
the T-V LINK function is used.
1 Press the 5 buttons to choose
the arrow from the menu
> EXT SETTING
EXT-1 DUBBING
EXT-2
EXT-3
TV
DTV
EXT-4
OK
D0022-EN
2 Press the 6 buttons to choose an
EXT terminal or TV.
Then press the a button
The arrow in the menu represents a signal
flow. The left side of the arrow shows a
signal source output from the EXT-2
terminal.
EXT-1/EXT-3:
The output signal of the device connected
to an EXT terminal passes through the TV
and is output from the EXT-2 terminal.
TV:
The picture and sound of the Analogue
terrestrial broadcasting TV channel you
are currently viewing are output from the
EXT-2 terminal.