JVC LT-26D50BJ Instructions Manual page 56

LT-32&26D50BJSJ_Eng.book Page 56 Thursday, October 7, 2004 4:42 PM
SET UP menu
INSERT
1 Press the 6 buttons to choose a
programme number (PR) for which
you will register a new TV channel
2 Press the green button and start
the INSERT function
> EDIT
PR ID
AV
01 BBC1
02 BBC2
03 ITV
04 CH4
05 CH5
06
07
08
09
OK
D0034-EN
To cancel the INSERT function:
Press the b button.
3 When the COUNTRY setting is
UNITED KINGDOM:
Press the number buttons to enter
the remaining CH number
• You cannot enter CC numbers.
When the COUNTRY setting is
IRELAND:
Press the 6 buttons to choose
"CH" or "CC", then enter the
remaining CH or CC number
The TV shifts to registration mode.
When the registration is completed, the
picture of the TV channel appears on the
screen.
• The CH/CC number is a number given
to each broadcast frequency that
carries a TV channel. If the TV cannot
detect the TV channel corresponding
to the broadcast frequency indicated
by the CH/CC number, a "no-signal"
picture appears.
56
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH
CH
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH 27
CH 28
CH 29
0 9
MANUAL
1 Press the 6 buttons to choose a
programme number (PR) for a new
TV channel
2 Press the blue button to activate
the MANUAL function
> MANUAL
PR ID CH
AV
01
BBC1 CH 21
02
BBC2 CH 22
03
ITV CH 23
04
CH4 CH 24
05
CH5 CH 25
06
CH 26
07
CH 27
08
CH 28
09
CH 29
SEARCH+
OK
D0035-EK
To cancel the MANUAL function:
Press the b button.
3 When the COUNTRY setting is
UNITED KINGDOM:
Continue to step 4
When the COUNTRY setting is
IRELAND:
Press the 3 button to choose the
SYSTEM (broadcasting system) for
a TV channel you want to register
If you do not know the correct
broadcasting system, set the SYSTEM to
"I". If "I" is not correct, you will not hear
the sound normally when the TV detects a
TV channel. In this case, retry to set the
SYSTEM correctly so that no problem
arises.
4 Press the green or red button to
search for a TV channel
Scanning stops when the TV finds a TV
channel. Then the TV channel is displayed.
5 Press the green or red button
repeatedly until the TV channel you
want appears
If the TV channel reception is poor:
Press the blue or yellow button to fine-
tune the TV channel.
6 Press the a button and register
the TV channel to a Programme
number (PR)
The normal EDIT menu is resumed.
FINE-
FINE+
SEARCH-