Using The Sonicwall Setup Wizard - SonicWALL TZ 170 Series Getting Started Manual

5

Using the SonicWALL Setup Wizard

The SonicWALL Setup Wizard provides user-guided instructions for configuring your
SonicWALL TZ 170.
Note:
It is important that you have collected any required ISP information before using
the Setup Wizard. See the list in Procedure 1, "Before You Begin" on page 2.
Tip:
If you do not know what type of Internet connection you have, contact your ISP. In
addition, the SonicWALL Setup Wizard will attempt to detect your connection
settings.
Configuring the SonicWALL TZ 170
Welcome - Click Next to begin.
1. Change Password - Change the administrative password. This is the password for
the admin account.
Old Password
New Password
Confirm
Note:
Keep your new password in a safe place. If you lose your password, you will
have to reset the SonicWALL security appliance to factory settings and lose your
configuration. For instructions on resetting your SonicWALL security appliance,
refer to the SonicOS Standard Administrator's Guide.
Click Next.
2. Change Time Zone - Change the Time Zone setting to your local time zone.
Time Zone
Automatically
adjust clock for
daylight saving time
Page 8
Should be populated with the default password, password.
Enter your new password.
Re-enter your new password.
Select the time zone for your location from the list.
Check this setting if you live in an area that observes Daylight
Saving Time.