Applying Power To The Sonicwall Tz 170; Connecting The Sonicwall Tz 170 - SonicWALL TZ 170 Series Getting Started Manual

2

Applying Power to the SonicWALL TZ 170

Plug the power supply into the back of the SonicWALL security appliance
appropriate power outlet.
The Power LED
SonicWALL TZ 170. The Test LED
performs a series of diagnostic tests. When the Test light is no longer lit, the SonicWALL
security appliance is ready for configuration.
If the Test LED remains lit after the SonicWALL TZ 170 has booted, restart the
SonicWALL security appliance.
For more trouble shooting information, refer to the SonicOS Standard Administrator's
Guide.
3

Connecting the SonicWALL TZ 170

Connecting the WAN Cable to the Internet
1. Connect one end of an Ethernet cable to your Internet connection, such as a DSL
modem or cable modem.
This cable may already be connected between your computer and your modem. If
so, disconnect it from your computer, and leave it connected to the Internet.
2. Connect the other end of the cable to the WAN port on the back of your
SonicWALL TZ 170.
The WAN LEDs on the front panel lights up indicating an active connection.
on the front panel lights up green when you plug in the
lights up and may blink while the appliance
Internet
DSL or Cable
Modem
WAN
SonicWALL TZ 170 Getting Started Guide
and into an
Page 5