SonicWALL TZ 170 Series Getting Started Manual page 11

DNS Server Address
#2 (optional)
Click Next.
DHCP
The Setup Wizard screen should display:
WAN Network Mode: NAT with DHCP Client
If you selected DHCP, you do not need to enter any WAN networking settings. The
network settings are provisioned automatically from a DHCP server.
Click Next.
PPPoE
The Setup Wizard screen should display:
WAN Network Mode - NAT with PPPoE Client
Obtain an IP Address
Automatically
Use the following
IP Address
PPPoE User Name
PPPoE Password
Inactivity Disconnect
(minutes)
Click Next.
PPTP
The Setup Wizard screen should display:
WAN Network Mode - NAT with PPTP Client
PPTP Server IP
Address
PPTP User Name
PPTP Password
Page 10
You can enter a secondary, back-up DNS server to use if the
first one fails.
Select this if your ISP assigns you a dynamic IP address.
Select this if your ISP has assigned you a static IP address,
and enter the address.
Enter the user name for your Internet account. Your ISP may
require you to enter your username in e-mail address format,
including "@" and the domain name, for example,
joe.user@sonicwall.com.
Enter the password for your Internet account.
Check this box if you want the SonicWALL TZ 170 to
disconnect from the Internet if there is no traffic for the number
of minutes you enter.
Enter the address of the PPTP server.
Enter your network user name.
Enter your network password.