SonicWALL TZ 180 Setup Wizard
1.
If the Setup Wizard does not display upon initial login to the SonicWALL
TZ 180 management interface, click the Wizards button in the left-hand
navigation panel of the interface.
2.
Select the Setup Wizard radio button and click the Next button to continue.
3.
Follow the on-screen prompts to complete the Setup Wizard. Refer to the
information you recorded in Obtain Configuration Information section, on
page 6 and Obtain Internet Service Provider (ISP) Information section, on
page 7 to complete this section.
4.
Depending on the changes made during your setup configuration, the
SonicWALL may restart.
Page 18
SonicWALL TZ 180 Setup Wizard