ADEMCO Vista-10P Installation And Setup Manual page 41

INPUT S/N L
AXXX-XXXX –
XMIT TO CONFIRM
PRESS TO SKIP
Wireless Key Predefined Default Templates
YOU MUST
YOU MUST
PROGRAMME
PROGRAM
THIS BUTTON
THIS
LOOP 4
BUTTON
(LOOP 4)
ENROLL AS "BR"
5804 Wireless Key Transmitter
For 5804
TEMPLATE 1 Loop Function
1 No Response
2 Disarm
3 Arm Away
4 No Response
TEMPLATE 2 Loop Function
1 No Response
2 Disarm
3 Arm Away
4 Arm Stay
TEMPLATE 3 Loop Function
1 24-hour audible
2 Disarm
3 Arm Away
4 Arm Stay
Manually enter the serial number printed on the label for the wireless key or press and
release the button to transmit its serial number.
Press [∗] to accept the serial number. The system will check for duplicate.
If necessary, press the [#] key to back up without saving, and re-enter the serial number.
Use the [A] key to move forward within the screen, and the [B] key to move backward.
If "Yes" was entered at the SET TO CONFIRM? prompt (first prompt following entry into
the ∗58 Expert Programming Mode), this display appears.
Confirm serial and loop numbers by activating the wireless key. Refer to the "Confirm"
prompt described in *56 Menu mode above for more information on confirming the serial
number.
If the serial number transmitted matches the serial number entered, the keypad will beep 3
times and will return you to the ENTER START ZONE NUMBER prompt to enter the
starting zone for the next wireless key.
IMPORTANT: When confirmed, the key is not active until it is assigned to a user number
(using the assigning attributes command, attribute "4"). See System Operation section.
[∗] to skip confirm.
LOOP 3
LOOP 3
LOOP 2
LOOP 2
LOOP 1
LOOP 1
These transmitters
are not intended for
use in UL
installations.
Zone Type
TEMPLATE 4
23
22
21
23
Zone Type
TEMPLATE 5
23
22
21
20
Zone Type TEMPLATE 6
7
22
21
20
GREEN/YELLOW
GRE
GREEN/YELLOW
RED/YELLOW
Note:
RED/YELLOW
LED
BUTTON A
5804BD 2-Way Wireless Key Transmitter
For 5804BD
Loop Function
1 No Response
2 No Response
3 Arm Away
4 Disarm
Loop Function
1 No Response
2 Arm Stay
3 Arm Away
4 Disarm
Loop Function
1 24-hour audible
2 Arm Stay
3 Arm Away
4 Disarm
LED
LED
BUTTON B
LOOP 2
LED
LOOP 4
BUTTON C
(YOU MUST PROGRAM
LOOP 3 THIS BUTTON)
BUTTON D LOOP 1
•
• •
• •
•
• • •
• • •
•
ENROLL AS "BR"
•
5804BD FRONT VIEW
Zone Type
23
23
21
22
Zone Type
23
20
21
22
Zone Type
7
20
21
22
5-5