Changing A Bulb - Ford GALAXY Owner's Manual

E72257
Note: When you remove the headlamp,
make sure that the front screw remains in
the headlamp moulding.
2. Remove the screws.
E88875
3. Disconnect the electrical connector.
4. Pull the headlamp as far as possible
towards the centre of the vehicle and
disengage it from the lower fixing point.
5. Lift the outer side of the headlamp and
remove it.
Note: When fitting the headlamp, make
sure that you reconnect the electrical
connector properly.
Lighting
Note: When fitting the headlamp, make
sure that you fully engage the headlamp in
the lower fixing point.
Note: When fitting the headlamp, make
sure that the front screw is located in the
headlamp moulding before you install it.
Note: When fitting the headlamp, tighten
the front screw first and then the rear screw.

CHANGING A BULB

Switch the lights and the ignition off.
Let the bulb cool down before
removing it.
Have Xenon bulbs changed by a
properly trained technician. There is
a risk of electric shock.
Do not touch the glass of the bulb.
Only fit bulbs of the correct
specification. See Bulb
Specification Chart (page 73).
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
Headlamp
Note: Remove the covers to gain access to
the bulbs.
64
WARNINGS
CAUTIONS