Instrument Lighting Dimmer; Clock - Ford GALAXY Owner's Manual

Opening and closing the sun blind
automatically
Press the switch to the second action point
and release it. Press it again to stop the
blind.
Note: If this does not operate correctly,
follow the relearning procedure below.
Anti-trap function
WARNINGS
The anti-trap function is deactivated
until the memory has been reset by
the relearning procedure.
Careless closing of the blind can
override the anti-trap function and
cause injuries.
The sun blind will stop automatically while
opening or closing and reverse some
distance if there is an obstacle in the way.
Sun blind relearning
WARNING
The anti-trap function is not active
during this procedure. Make sure that
there are no obstacles in the way of
the moving blind.
Note: The relearning process must be
started no later than 30 seconds after
turning the ignition on.
In case the blind no longer opens or closes
properly, follow this relearning procedure:
1. Press switch B to the first action point
twice and release it within two
seconds.
2. Press switch A to the first action point
twice and release it within two
seconds.
Convenience features
137
3. Press and hold switch B to the first
action point, until the blind fully opens.
4. Press and hold switch A to the first
action point, until the blind fully closes.
If step 2 is not completed within 15
seconds, the relearning function will be
interrupted. Turn the ignition off, wait for
another 30 seconds and then turn the
ignition back on again. Start the procedure
once more from the beginning.
Confirm that relearning has been
completed by using automatic opening
and closing.
INSTRUMENT LIGHTING
DIMMER
E70723

CLOCK

Note: Some navigation systems will
automatically set the date and time on the
clock using GPS signals.
Note: See General Information (page 89).
1. From the main menu, select the clock
function.
2. Select the option required.
3. Press OK.
4. Using the right, left, up and down arrow
buttons, select and change the value.