Lead Edge / Trail Edge Void Adjustment (Printer Section) - Panasonic FP-D250 User Manual

Location

5. Lead edge / Trail edge void adjustment (Printer Section)

Location
Procedure
Registration Adjustment
(1)Make a copy of Test Chart 53/54.
(2)For adjustment of lead edge registration
when making a copy off the platen glass,
use F6-05.
(To advance the registration, input a more
(+) number)
(3)For adjustment of lead edge registration
when making a copy using the FA-A888,
use F6-36 and 37 to achieve proper
registration.
(To delay the registration, input a more (–)
number)
(4)For adjustment of lead edge registration,
when making a copy using the FA-A355,
use F6-91.
(+/–) = delay / advance
Procedure
(1)Make a copy of Test Chart 53/54.
(2)Adjust the lead edge void using F6-07.
(+) = more void
(–) = less void
(3)Adjust the trail edge void by using F6-09.
(+) = less void
(–) = more void
3-47