Canon PIXMA iP5200R Service Manual page 61

<EEPROM information contents>
Print items:
Contents:
Settable values:
Default values:
Items set to default values: Items re-set to the factory values (at shipment) by initialization
Print items
Printer Printer name
Firmware NIC firmware version
Version
Wireless LAN Wireless LAN enabled/disabled
Standard Compliant wireless LAN standard
Destination Corresponding channel list
MAC Address MAC address for wireless LAN on
NIC board
Network Type Operation mode of wireless LAN
SSID Set SSID
When ANY is set, current SSID
is printed in parentheses.
Channel Current channel
When inactive, left blank
Encryption Current encryption method
Authentication Current authentication method
Attached Attached information regarding
Information encryption and authentication
Link Status Status of wireless LAN
When wireless LAN is invalid, if
nonexistent SSID is set, status
becomes Inactive.
Other than this case, status
becomes Active.
Signal Signal strength: 0 - 100 %
Strength When inactive, 0 %
Link Quality Communication quality: 0 -
100 %
When inactive, 0 %
Transmission Current wireless LAN speed:
Rate 1/2/5.5/6/9/11/12/18/24/36/48
/56 Mbps
When inactive, left blank
Mode IP address setting method
When disabled, left blank
IP Address Current IP address
When disabled, left blank
Subnet Mask Current Subnet mask
When disabled, left blank
Default Current default Gateway
Gateway When disabled, left blank
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
List item for network setting print
Meaning of list items
Settable values for users
Values at shipment from the plant
Contents Settable values
-
-
Enabled/Disabled
-
-
-
-
Optional
(can be freely set.)
[Varies depending on
connection status.]
OFF/WEP/TKIP/AES
Auto
/Open System
/Shared Key/WPA-PSK/
WPA2-PSK
WEP setting:
64/128bit, ASCII/Hex,
Key*
* Key set by user is
displayed.
WPA-PSK setting:
Character Password
/64 Hex digits
-
[Varies depending on
communication
environment.]
[Varies depending on
communication
environment.]
[Varies depending on the
communicating devices.]
Auto/Manual
0.0.0.0 -
255.255.255.255
0.0.0.0 -
255.255.255.255
0.0.0.0 -
255.255.255.255
6
Default values
IP_5200R (Overseas)
[Specific value. fixed]
Enabled O
IEEE 802.11g[fixed]
1B [fixed]
[NIC BOARD-specific
value. Fixed]
Infrastructure [fixed]
BJNPSETUP O
[Blank] O
OFF O
Open System O
[Blank] O
Inactive
0 %
0 %
[Blank]
Auto O
192.168.1.123 O
255.255.255.0 O
0.0.0.0 O
* Items
set to
default
values