Canon PIXMA iP5200R Service Manual page 50

Print
8 B
results
Uneven
printing at the
trailing edge of
Print paper
9 B
results
*1: Change the paper in each Bottom plate cleaning. The cleaning can end when paper does not get any
soiling.
*2: Locations to clean in servicing when soiling on paper in automatic duplex printing persists:
*3: How to prepare and set the ASF sub-roller cleaning sheet:
1) Fold a sheet of plain paper lengthwise in half.
2) Fold the paper at approx. 60 mm from the end, and fold the folded end in half backward, as shown
below.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
they warp
- 10 sheets (max.)
significantly, the
set in the ASF
warping portions
of paper get over
the cover guide,
not being aligned
along the guide
properly.
- In the low Due to decrease
temperature and of the friction
low humidity coefficient of the
environment paper ejection
rollers, or due to
inaccuracy of the
print head
alignment
2-10
sheets of paper appears on
in the ASF. printouts.
- Perform Bottom Uneven
plate cleaning. printing at the
bottom of
paper
- Perform manual
print head
alignment.