Connecting Auxiliary Equipment; Connecting The Ac Power Cord; Compu Play - JVC RD-MD5 Instructions Manual

RD-MD5(B)-e.fm Page 4 Wednesday, December 2, 1998 11:40 AM
CAUTION: Make all connections before plugging the System into an AC power outlet.

Connecting Auxiliary Equipment

Connect an (not supplied) signal cord between the AUX IN terminal on the System and the output terminals of your auxiliary equipment (e.g.
turntable). You can listen to this source.

Connecting the AC Power Cord

Firmly insert the supplied AC power cord into the AC inlet on the back of the Unit.
CAUTIONS:
• ONLY USE THE JVC POWER CORD PROVIDED WITH THIS SYSTEM TO AVOID MALFUNCTION OR DAM-
AGE TO THE SYSTEM.
• BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN THE SYS-
TEM IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.
Now you can plug the AC power cord into the wall outlet, and your System is at your command!!

COMPU PLAY

JVC's COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, an MD, or turn on the radio with a single press of the play button for that function. One Touch
Operation turns the power on for you, then starts the function you have specified. If the System is not ready (no CD in place, for example), the
System still powers on so you can insert a CD.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Unit
6
CD button
TUNER BAND button
6
MD button
AUX button
Stereo mini plug
Signal cord
(not supplied)
AC IN
Power cord
On the Remote Control
6
CD button
TUNER BAND button
6
MD button
AUX button
Pin-plug x 2
Turntable (with built-in equalizer)
(not supplied)
4