Connecting Auxiliary Equipment; Connecting To The Mains Supply - JVC UX-D100 Instruction Manual

Connecting Auxiliary Equipment

Connect the AUX IN terminals on the rear of the main unit to the AUX output terminals on
the auxiliary equipment with an RCA stereo audio cable illustrated below.

Connecting to the Mains Supply

• Ensure all audio connections have been made before connecting the unit to mains power.
• Install the unit near a mains socket where the mains adapter can be easily reached.
• To switch the unit off completely, remove the mains plug from the mains socket.
• To save energy, turn the unit off completely when not in use.
1. Fully unwind the mains cable.
2. Connect the AC~ socket to the rear of the unit, then connect the mains plug to the
mains socket.
12
UX-D100_IB.indd 12
Rear View of the Main Unit
R
RCA stereo audio cable
Rear View of the Main Unit
Auxiliary Equipment
L
(included)
To the mains
socket
R L
21/04/2015 10:29