JVC VR 601 Instruction Manual page 64

10.1.3 View the VR-601 video from a remote PC
Follow the instructions below to use the Network Viewer to browse a VR-601 video from a
remote location. Upon entering the Network Viewer; the connection box will appear as follows.
1. Choose a channel number from the Channel drop-down list.
2. Assign a name for the chosen VR-601.
3. Type in the password and IP of the device and click the Add tag to add the device to the
connection list.
4. Click the Connect tag to establish the connection between the devices and the computer.
Click OK to begin viewing images.
NOTE: Upon connection, the connection status box indicates the name and IP address
of the selected device. If there's a failure to connect, a "Fail" message appears
on the screen right after the device IP address; otherwise an "OK" appears. To
add more connections or units to the VR-601, please repeat the above
instructions.
Functions
Channel
Name
Password
URL of the Remote Device Type the IP address which you preset for the device
URL of a Proxy
Port
Modify
Delete
Connect
OK
Cancel
Assign a display location when you have multiple devices connected.
This box allows you to assign a name to the chosen device.
Type the preset password for making a connection.
Type your proxy server address when accessing the Internet via a proxy
server.
Enter the designated port setting of your proxy server.
Click to change the settings of a chosen device.
Click to remove the connection of a chosen device
Click to establish the connection between the devices and the computer.
Click to access the display page of the Network Viewer
Click to exit the program of the Network Viewer.
64
Description