Hard-Disk Drive Installation - JVC VR 601 Instruction Manual

3.2 Hard-Disk Drive Installation

The DVR is equipped with two compartments of hard-disk drive. The unit usually comes with one
hard-disk drive installed in the compartment HD1, which is default-configured as a master. If you need
a second hard-disk drive to be installed in the compartment HD2 (Mobile), please contact your
distributors or installers for specific instructions on how to install it. Please don't serve yourself before
consulting your installers. If there is only one hard-disk drive in the mobile compartment, please set the
HD2 USAGE option to REC (Please refer to section 5.5) before proceed recording function. The
jumper-settings arrangement of installed hard-disk drives for the system (Table 3.2 A.) is shown in the
tables below.
Table 3.2 A. The jumper settings of hard-disk drives in the system
IDE 1
IDE 2
Table 3.2 B. Compatible hard-disk drives
Manufacturer
Seagate
Maxtor
NOTE: Hard-disk drives not shown on this list have not been tested by the engineering team
and are not recommended for use with this product. For the latest updated list on the
recommended hard-disk drives, please contact your dealers or distributors.
Location
Compartment HD 1
Compartment HD 2
Model
ST380020A/P
ST340810A/P
4A160J0-1A
4R080L0-1
6Y120L0-1
19
Jumper
Master (Default)
Master
Capacity Rotation
80GB 5400 RPM
40GB 5400 RPM
160GB 5400 RPM
80GB 5400 RPM
120GB 7200 RPM