Table of Contents
Advertisement
MENU BACKGND:
There are 3 levels of background color transparency, you can choose from : level 1 is totally
transparent, level 3 is opaque, and level 2 is between level 1 and 3. The background color is used
in setup menu and search function.
BUZZER:
This option determines the embedded buzzer sounding a tone to signal the following situations. A
tone lasts about two seconds long.
ON: Enables buzzer.
OFF: Disables buzzer.
Situation
Alarm occurs
Video loss occurs
Disk is full
Load factory default
Buzzer set to ON
Enable/disable key lock function
Power on /off mobile rack HDD
Backup operation complete
Timer activate/deactivate
Recording switching between HDD
PASSWORD:
This option allows you to set a password to prevent any unauthorized re-formatting of the
hard-disk drives or use by a network viewer. The standard password is "9999".
OLD PASSWORD: Enter the pre-set password (or the standard password if this is the initial
NEW PASSWORD: Enter a 4-digit-number password of your choosing which will replace
SETUP PWD:
When this option is on, user must pass the password check before entering the setup menu.
ON: Enables it.
OFF: Disables it.
DEFAULT:
This option allows you to reload the factory default setting. Please do note that the password can
not be changed in the factory default setting.
setting) to access the password setting system.
the pre-set password (or the standard password "9999").
51
Advertisement
Table of Contents
