Table of Contents
Advertisement
4.2.3 Alarm Recording
Take the following steps to activate the programmed alarm recording. For ALM OPERATION,
REC RATE, REC QUALITY, AUDIO, ALM TYPE, ALM DURATION, and PRE-ALARM settings,
please refer to section 5.2 for more details.
(1) Press the Setup button
(2) Select ALARM and press the Enter button
(3) Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If
audio is required, set AUDIO to ON. If pre-alarm recording is required, set PRE-ALARM to
ON.
(4) To activate the alarm recording, set ALM OPERATION to ON. To deactivate it, set ALM
OPERATION to OFF.
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO ALARM PAGE
4.2.4 Externally triggered Recording
By connecting the RECORD IN of ALARM I/O on the rear panel of the DVR, you can
activate/deactivate the recording function of a DVR. The file will be kept with a prefixed "R".
Please refer to section 2.3 for more details.
* About the location of the buttons, please refer to Page 10 2.1 Front View.
to enter the MAIN MENU.
MAIN MENU
to enter the ALARM SETTING.
ALARM SETTING
ALM OPERATION
REC RATE
REC QUALITY
AUDIO
ALM TYPE
ALM DURATION
PRE- ALARM
MAIN PAGE
ALARM REC ENABLE
28
: OFF
: 20F/S
: BEST
: OFF
: NO
: 0 SEC
: OFF
Advertisement
Table of Contents
