Table of Contents
Advertisement
4.5.2 Security Digital Card (SD Card) Backup
The SD card slot of the rear unit has three functions as shown below:
1.
Archive Single image Clips into SD Card
Please take the following steps to archive a critical image in a SD card.
(1) Insert a SD Card into the SD card slot of the rear unit.
(2) Start playing back the recorded video. (When playing back recorded video made by a
multiplexer, you must get into the multiplexing mode and display picture by picture in
order to select the desired image for archiving. Press the Monitor button
the multiplexing mode under this mode so that the light of the Monitor button
and the pictures are switching swiftly)
(3) Press the PAUSE button
(4) Press the Enter button
The quantity of pictures that can be stored depends on the SD card capacity. It depends
on SD card capacity how many pictures can be stored. You can have the saved images
printed out in any computer. The image is stored in the JPEG compressed format. If
more than one clip is stored in a SD card, file names will be assigned in sequence as
shown below.
2.
Backup the System setting info into SD Card.
The VR-601 offers a quick setup method by using a SD card. If a user wants to set many
VR-601 devices with the same settings, the VR-601 could save the whole setting in the SD card,
then transfer it to another DVR.
Save the whole setting into the SD card:
Insert a SD card into the SD card slot.
Press the Setup button
Highlight SYSTEM and press the Enter button
Set SD SETUP to SAVE. Then the system setting info will auto save into SD card.
* About the location of the buttons, please refer to Page 10 2.1 Front View.
to freeze the desired pictures.
to save the image in the SD Card.
SAVE TO J0000.JPG
SAVE TO J0001.JPG
...
SAVE TO J000N.JPG
to enter the setup mode and select the SYSTEM.
38
to enter the SYSTEM SETTING page.
to get into
is off
Advertisement
Table of Contents
