Timer Recording; Show View Timer Programming - JVC ShowView LPT0923-001A Instructions Manual

TIMER RECORDING

44
EN
S V Timer Programming
TM
HOW IEW
You can programme this unit to timer-record as many as
32 programmes.
With the S V system, timer programming is greatly
HOW IEW
simplified because each TV programme has a corresponding code
number which your unit is able to recognize.
You can use the remote control to enter the S
Make sure that the unit's built-in clock is set properly.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/SAT/DVD switch to DVD.
0 – 9
CANCEL
CLEAR
DISPLAY
VPS/PDC#
1
Load a recordable disc if recording to DVD.
2
Press PROGRAMME to access the programme top screen.
3
Press rtw e to select "SHOWVIEW", then press ENTER.
When "PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMMES" appears on the TV screen, you need to cancel
some of the reserved programmes. (
4
Press the number keys to
enter the S V number of a
HOW IEW
programme you wish to record.
OR
Press rtw e to select the
desired number key on the
screen, then press ENTER.
Repeat to enter all needed
numbers.
5
Press rt to select "RECORD TO", then press ENTER. Press
rt to select the desired recording deck, then press ENTER.
6
Press rtw e to select "CONFIRM", then press ENTER.
If the number you entered is invalid, "SHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRY" appears on the TV
screen. Input a valid S
HOW
If "GUIDE PROGRAMME IS NOT SET SET GUIDE PROGRAM
THEN RETRY" appears on the TV screen, set Guide Program
Numbers manually. ( pg. 70)
V
HOW IEW
CABLE/SAT
TV DVD
PROGRAMME
ENTER
RETURN
pg. 47)
1 1
3 3 PROGRAMME > SHOWVIEW (1/2)
2 2 2
SHOWVIEW NO.
1 2 3 4
1
SELECT WITH [ ]
THEN PRESS [ENTER] 4
7
PRESS [PROGRAMME]
TO EXIT
DELETE
RECORD TO
PROGRAMME ENTER
EXIT
SELECT
V number.
IEW
7
The S
HOW
recording information are displayed on the TV screen. Check the
programme data.
To cancel this setting, press RETURN.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see "S
number.
the Guide Program number correctly.
8
Press rt to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
"INPUT TITLE" (
"CATEGORY" (
"VPS/PDC" (
"WEEKLY/DAILY" (
"REC MODE" (
9
Press rt to select "OK", then press ENTER to access the
Programme Confirmation screen.
10
Press w e to select "EXIT", then press ENTER to complete
timer programming.
To programme another timer, press w e to select "CONTINUE", then
press ENTER.
If "PROGRAMME OVERLAPPED" appears on the TV screen, see
page 47.
NOTES:
There may be cases that S
prolongs the stop time of the programming.
When two successive programmes are recorded on a DVD-RW disc
with S
HOW
second one may be left off the recording.
If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.
IMPORTANT:
If you have moved to a different area or if a broadcasting station's
channel number has been changed, the wrong channel number will
be displayed on the S
this happens, set the correct Guide Program number for that station.
( pg. 70, "S
Satellite Receiver Users
To timer-record a satellite broadcast using the S
system:
A Perform "Satellite Receiver Control Setting" (
B Perform "S
C Leave the satellite receiver's power on.
2 3
5 6
8 9
0
DELETE ALL
DVD
CONFIRM
V number you entered and the matching timer-
IEW
V TM System Setup" (
HOW IEW
pg. 50, "Modify Title Name")
pg. 51, "Modify Category")
pg. 45, "VPS/PDC Recording")
pg. 45, "Weekly/Daily Recording")
pg. 35, "Recording Mode")
V Timer Programming function
HOW IEW
V Timer Programming function, the beginning of the
IEW
V programme screen in step 7. When
HOW IEW
V TM System Setup")
HOW IEW
V TM Timer Programming" (
HOW IEW
pg. 70) and set
V
HOW IEW
pg. 23).
pg. 44).