11b/g Wireless Long Range Multi-function 7+1 AP
The MAC addresses and signal strength for each client is displayed. Click on the
Refresh button to refresh the client list
NOTE: You will only see the client when you have other wireless devices connected.
4.2.3 System Log
Click on the System Log link under the Status drop-down menu. The device
automatically logs (records) events of possible interest in its internal memory. If there
is not enough internal memory for all events, logs of older events are deleted, but
logs of the latest events are retained.
4.3 System
4.3.1 System Properties
Click on the System Properties link under the System drop-down menu. This page
allows you to switch the operating mode of the device, as well as specify a name and
select the operating region.
Click on the System link on the navigation
drop-down menu. You will then see three
options: System Properties, IP Settings, and
Spanning Tree Settings. Each option is
described in detail below.
Version 1.1
17