Table of Contents
Advertisement
User Setting
The function allows you to backup the current device configurations into the AP as the default value. If extreme problems
occur, or if you have set the AP incorrectly, you can push the Reset button to revert all the configurations of the AP to the
user default.
Back Up Setting as Default: Click Backup to backup the user settings you would like to use as the default settings.
Restore to User Default: Click Restore to restore the Access Point to user's default settings.
Note1: After setting the current settings as the default, you should click the Restore to Default on the web interface for reverting
the settings into the factory default instead of pushing the reset button.
Note2: Please write down your account and password before saving. The user settings will now become the new default settings at
the next successful login.
System Log
The AP automatically logs (records) events of possible interest in its internal memory. To view the logged information, click the Log
link under the System Manager menu. If there is not enough internal memory to log all events, older events are deleted from the log.
When powered down or rebooted, the log will be cleared.
Hide quick links:
Advertisement
Table of Contents
