Wireless; Wireless Network; Wds Link Settings - EnGenius ECB3500 User Manual

11b/g Wireless Long Range Multi-function 7+1 AP

6.4 Wireless

6.4.1 Wireless Network

The Wireless Network page allows you to configure the wireless mode, channel,
SSID, and security settings.
Wireless Mode: Depending on the type of wireless clients that are connected to the
network, you may select B, G, B/G-mixed, and SuperG. If you are not sure about
which clients will be accessing the wireless networks, it is recommended that you
select B/G-mixed for the best performance.
Channel: Select a channel from the drop-down list. The channels available are
based on the country's regulation. When selecting Infrastructure mode, a channel is
not required, however, when selecting Adhoc mode, you must select the same
channel on all points.
SSID: The SSID is a unique named shared amongst all the points of the wireless
network. The SSID must be identical on all points of the wireless network and cannot
exceed 32 characters. You may specify an SSID or select one from the Site Survey.
Click on the Apply button to save the changes.

6.4.2 WDS Link Settings

Click on the WDS Link Settings.
(Wireless Distribution System) which allows the Access Point to function as a
repeater.
Click on the Wireless link on the navigation
drop-down menu. You will then see four
options: Wireless Network, WDS Link Settings,
WDS Security, and
Settings. Each option is described below.
On this page you can configure the WDS
Version 1.1
Wireless Advanced
53