Table of Contents
Advertisement
OPERATIONS ON VCR DECK
50
EN
Basic Recording
Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
VCR/DVD
VCR/DVD
8
REC MODE
1
Load a cassette with the record safety tab intact.
The unit's power comes on automatically and the counter is reset to
0:00:00.
2
Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
3
Press CH +/– or the number keys to select the channel you
wish to record.
4
Press REC MODE repeatedly to set the recording mode.
5
Press 7 on the unit to start recording. Or press and hold 7 and
press 4 on the remote control.
The VCR recording lamp lights up on the unit.
Video Calibration takes place at the beginning of both the first
SP and the first EP recording after inserting the cassette.
(
pg. 51)
6
Press 9 to pause recording.
You can select channel during the Record Pause mode.
To resume recording, press 4.
7
Press 8 to stop recording.
The VCR recording lamp lights off on the unit.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording or timer recording (
resume automatically when power is restored to the unit unless the
unit's memory backup has expired.
4
7
9
REC MODE
CH +/–
8
1
2
3
4
5
6
0 – 9
7
8
9
0
4
9
7
CH +/–
pg. 50, 51, 52), the recording will
Recording Features
Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
Press VCR/DVD repeatedly so that the VCR lamp lights up on the
unit.
VCR/DVD
CANCEL
TV/VCR
Watch Another Program While Recording On The Unit
While recording is going on, you can watch another program on the
TV by using the TV's tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV
in advance. (
pg. 70)
1
During recording, press TV/VCR to select TV mode if your unit
is connected to the TV via the RF connection.
VCR mode is disengaged, then the VCR indicator lights off and "TV"
appears on the front display panel.
VCR indicator lights off.
The program received on the TV's tuner is displayed on the TV
screen.
2
Slide the TV/CABLE/DBS/DVD switch to TV.
3
Press CH +/– repeatedly to select the desired channel.
Accidental erasure prevention
To prevent accidental recording
on a recorded cassette, remove
its safety tab. To record on it
later, cover the hole with
adhesive tape.
7
1
2
3
4
5
6
8
7
9
0
DISPLAY
CH +/–
Record safety tab
TV/VCR
Hide quick links:
Advertisement
Table of Contents
