(Odu,Enable,1:1,Csat#1,Config,Receiver,Lna) Fault-Logic; (Odu,Enable,1:1,Csat#2,Config,Receiver,Lna) Fault-Logic; (Odu,Enable,1:1,Csat#1,Config) Miscellaneous (Odu,Enable,1:1,Csat#2,Config) Miscellaneous (Odu,Enable,Stand-Alone,Config) Miscellaneous; (Odu,Enable,1:1,Csat#1,Config,Miscellaneous) Cold-Start - Comtech EF Data RAP-100 Installation And Operation Manual

RAP-100 Remote Access Panel
3.2.29 (ODU,ENABLE,1:1,CSAT#1,CONFIG,RECEIVER,LNA)
(ODU,ENABLE,1:1,CSAT#2,CONFIG,RECEIVER,LNA)
(ODU,ENABLE,STAND-ALONE,CONFIG,RECEIVER,LNA)
The user is prompted to select either SUMMARY or NO SUMM, using the
LEFT/RIGHT arrow keys, then to press ENTER. This controls whether or not the a LNA
Current-Window fault will activate the SUMMARY FAULT RELAY. This allows the
user to select whether or not to switch the ONLINE/OFFLINE CSAT in the event of a
LNA current-window fault.
3.2.30 (ODU,ENABLE,1:1,CSAT#1,CONFIG)
(ODU,ENABLE,1:1,CSAT#2,CONFIG)
(ODU,ENABLE,STAND-ALONE,CONFIG)
This menu item is used to select miscellaneous ODU parameter for modification. Use the
LEFT/RIGHT arrow keys, then press ENTER.
3.2.31 (ODU,ENABLE,1:1,CSAT#1,CONFIG,MISCELLANEOUS)
(ODU,ENABLE,1:1,CSAT#2,CONFIG,MISCELLANEOUS)
(ODU,ENABLE,STAND-ALONE,CONFIG,MISCELLANEOUS) COLD-START
The user is prompted to select either ENABLED or DISABLED, using the LEFT/RIGHT
arrow keys, then to press ENTER.
3.2.32 (ODU,ENABLE,1:1,CSAT#1,CONFIG,MISCELLANEOUS)
(ODU,ENABLE,1:1,CSAT#2,CONFIG,MISCELLANEOUS)
(ODU,ENABLE,STAND-ALONE,CONFIG,MISCELLANEOUS) AFR(Auto Flt Rec)
The user is prompted to select either ENABLED or DISABLED, using the LEFT/RIGHT
arrow keys, then to press ENTER.
Rev. 1
SELECT LNA FAULT LOGIC:
SUMMARY NO SUMM (ENTER)
MISC: COLD-START
XREF REF-ADJUST
SELECT COLD START STATE:
ENABLED DISABLED (ENTER)
SEL AUTO FAULT RECOVERY:
ENABLED DISABLED (ENTER)
MISCELLANEOUS
MISCELLANEOUS
MISCELLANEOUS
AFR
RTC
ODU Operation
FAULT-LOGIC
FAULT-LOGIC
FAULT-LOGIC
COLD-START
COLD-START
AFR(Auto Flt Rec)
AFR(Auto Flt Rec)
3–9