Video Plus+ Timer Programming - JVC HR-XVS20EK Instructions Manual

32
VIDEO Plus+
Timer
Programming
With the VIDEO Plus+ system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your unit is able to recognize.
Before performing the VIDEO Plus+ Timer
Programming:
● Make sure that the unit's built-in clock is set properly.
● Insert a cassette with the safety tab in place. The unit will
come on automatically.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/S-VHS/DVD switch to the right.
A
Select the S-VHS deck.
On the unit
Press S-VHS/DVD repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
®
OPERATIONS ON S-VHS DECK (cont.)
B
Access the VIDEO Plus+ screen.
Press PROG.
The front display panel looks like this:
C
Enter the PlusCode number.
Press the number keys to
enter the PlusCode number
of a programme you wish to
record.
● If you make a mistake, press &
and input the correct number.
The PlusCode number you enter appears on the front display
panel with only a 4-digit number:
D
Access the VIDEO Plus+ Program screen.
Press OK, then the VIDEO
Plus+ Program screen
appears (if you're just starting
out, "P1" appears).
The front display panel shows the programme number. Pressing
" changes the display to the programme start time, the stop
time, the date, the tape speed then the channel position.
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, or "TV PROG" shows "– –", press PR +/– to
input the channel position number on which your unit
receives the station, then press OK or e.
● If the number you entered is invalid, "ERROR" appears on the
TV screen and "Err" appears on the front display panel. Press
& and input a valid PlusCode number.