Programme Playback - JVC HR-XVS20EK Instructions Manual

58
Playback Features
with Play Set Up
menu
Turn on the TV and select the video channel (or AV
mode).
Slide the TV/S-VHS/DVD switch to the right.
OPERATIONS ON DVD DECK (cont.)

Programme Playback

You can play back groups on an MP3 disc in the desired order.
A
Access the Play Set Up menu.
Press REPEAT in stop mode.
B
Select the mode.
Press w e to move the arrow
to "PROGRAM", then press
OK.
The programme table appears
under the Play Set Up menu.
C
Select the groups in the desired order.
Press the appropriate number
keys to select the group.
Refer to "Track/group
selection" on page 57.
Up to 18 groups can be
programmed.
You may select the same group
more than once.
If you have specified a wrong selection
Press 8. The last selection programmed is erased.
D
Start playback.
Press 4. Playback starts in the selected order.
When all of the programmed tracks have been played back,
Programme Playback stops, but the programmed information
remains.
To clear the Play Set Up menu, press REPEAT.
To stop Programme Playback, press 8.
To cancel programming, press 8 in stop mode.
You can also quit Programme Playback in the following cases:
• Press x to open the disc tray.
• Turn on the unit.
NOTES:
You cannot play back tracks in a group in the desired order.
By pressing REPEAT during Program Playback to display the
program table on the TV screen, the program number
currently being playback is displayed in yellow.
The programmed order number
is shown under each program
number.