Express Timer Programming - JVC HR-XVS20EK Instructions Manual

34
Express Timer
Programming
If you do not know the PlusCode number for the programme you
wish to record, use the following procedure to set your unit to
timer-record the programme.
Before performing Express Timer Programming:
Make sure that the unit's built-in clock is set properly.
Insert a cassette with the safety tab in place. The unit will
come on automatically.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/S-VHS/DVD switch to the right.
OPERATIONS ON S-VHS DECK (cont.)
Example: To timer-record the programme from 21:00 to
22:00 on 25th December, on channel 1.
A
Select the S-VHS deck.
On the unit
Press S-VHS/DVD repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
B
Access the VIDEO Plus+ screen.
Press PROG.
C
Access the Programme screen.
Press START +/–. (If you're
just starting out, "P1"
appears.)
The front display panel looks like this:
D
Enter the programme start time.
Press START +/– to enter the
time you want recording to
start.
Press and hold START +/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
The front display panel looks like this:
E
Enter the programme stop time.
Press STOP +/– to enter the time you want recording to
stop.
Press and hold STOP +/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
F
Enter the programme date.
Press DATE +/–.
The current date appears on the TV screen. The date you enter
appears in its place.