Related Manuals for JVC HR-XVC40B
Summary of Contents for JVC HR-XVC40B
- Page 1 DVD PLAYER & VIDEO CASSETTE RECORDER HR-XVC40B HR-XVC41S INSTRUCTIONS LVT1948-002A...
- Page 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE D’ELECTROCUTION ATTENTION NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may...
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in elec- tric shock or fire hazard. -
Page 4: Table Of Contents
Contents Introduction .....5-9 Moisture Condensation ....5 Symbol Used in this Manual About the Symbol Display... -
Page 5: Introduction
Introduction To ensure proper use of this product, please read this owner’s manual carefully and retain reference. This manual provides information on the operation and maintenance of your unit. Should the unit require service, contact an authorized service location. Moisture Condensation Never operate the unit immediately after moving it from a cold location to a warm location. -
Page 6: Types Of Playable Discs
Types of Playable Discs (8 cm / 12 cm disc) Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD±R/RW and CD-R/RW that contains audio titles, MP3, WMA, DivX and/or JPEG files. -
Page 7: Front Panel
Front Panel Disc Tray (DVD deck) Insert a disc here. Cassette Compartment (VCR deck) Insert a video cassette here. POWER 1/: Switches the unit ON and OFF. REW (m - DVD: Skip to beginning of current chapter or track, press twice in quick successions to go to previous chapter or track. -
Page 8: Remote Control
Remote Control 1 1 / / I (POWER) : Switches unit ON and OFF. TV/VCR : To view channels selected by the VCR tuner or by the TV tuner Z Z (OPEN/CLOSE, EJECT) : Opens and closes the disc tray. Ejects the tape in the VCR deck DVD : Select the unit function mode to DVD. -
Page 9: Rear Panel
Rear Panel Caution Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. b c d e ANT.IN Connect the VHF/UHF/CATV antenna to this terminal. VCR IN LINE 1 (VIDEO/AUDIO (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, VCR, Camcorder). -
Page 10: Connecting An Antenna Or Cable Tv
Connecting an Antenna Connecting an Antenna or Cable TV or Cable TV a Antenna Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT.IN on your DVD+VCR. -
Page 11: Optional Tv Connections
How to set the DVD+VCR’s RF output channel 1. When the DVD+VCR is turned off, press and hold CH (+/-) on the front panel for more than five sec- onds. “RF03” or “RF04” appears in the display window. 2. Press CH (+/-) to change the RF output channel (RF03 or RF04). -
Page 12: Connection To An Amplifier
Connection to an Amplifier You can only listen to DVD playback using COAXIAL (X) and AUDIO OUT (A2) connections. The VCR will still be heard through the DVD/VCR AUDIO OUT (A1) jack. Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the unit to the audio... -
Page 13: Initial Settings - Vcr
Initial Settings - VCR Initial Settings - VCR By using the VCR Setup menu, you can make various adjustments to items such as clock setting, and timer recordings. Your DVD+VCR allows remote control adjustment of several features. General Operation 1. Press VCR on the remote control. 2. -
Page 14: Tuning
TUNING This DVD+VCR is equipped with a frequency synthe- sized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Auto Channel Programming 1. Choose the SOURCE SELECT option, then use b / B to select TUNER. -
Page 15: Displaying Disc Information On-Screen
Displaying Disc Information Displaying Disc Information on-screen - DVD on-screen - DVD You can display various information about the disc loaded on-screen. 1. Press DISPLAY to show various playback infor- mation. The items displayed differ depending on the disc type or playing status. 1 / 3 1 / 12 0:20:09... -
Page 16: Language
LANGUAGE Menu Language Select a language for the VCR and DVD’s setup menu and information display. Disc Audio / Subtitle / Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. Original: Refers to the original language in which the disc was recorded. -
Page 17: Audio
AUDIO Each DVD disc has a variety of audio output options. Set this unit’s AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG Bitstream: Select “Bitstream” if you connect the DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. -
Page 18: Others
4. Press ENTER (OK) to confirm your rating selec- tion, then press SETUP MENU to exit the menu. 5. Press Z (OPEN/CLOSE) to activate parental control. Password (Security Code) You can enter or change password. 1. Select “Password” on the LOCK menu then press 2. -
Page 19: Remote Control Function
Remote Control A/B/C Code Switching The remote control is capable of controlling three JVC video units independently. Each of the units can respond to one of three codes (A, B or C). The remote control is preset to send C code signals because your unit is initially set to respond to C code signals. -
Page 20: Operations - Vcr
Operation This chapter describes how to operate the VCR and DVD. VCR Tape Playback Press the VCR button to select the device to be operated. Basic Instructions 1. Turn on the TV. 2. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO. -
Page 21: Cm Skip (Commercial Skip)
CM SKIP (Commercial Skip) This feature is useful for skipping commercials or short program segments. 1. Press in playback mode. The unit performs a fast forward picture search through 30 seconds of recording. 2. Press again to extend the search time by an addition 30 seconds. -
Page 22: Vcr Tape Recording
VCR T ape Recording VCR T ape Recording Basic Instructions 1. Turn on the DVD+VCR and TV. 2. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO connec- tion is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO. - Page 23 CHANNEL: Select a TV channel, LINE1 or LINE2. If you have CABLE TV and use a cable box (con- verter) you must set the channel to match the cable box output channel (usually CH 3 or 4). Change channels on the cable box instead of with the DVD+VCR.
-
Page 24: Basic Recording (One-Touch Recording)
Basic Recording (One-Touch Recording) You can record from an external component, such as a camcorder or VCR, connected to any of the unit’s external inputs. 1. Make sure that the component you want to record from is connected properly to the unit. See page 11. 2. -
Page 25: Copying From Dvd To Vcr
Copying from DVD to VCR You can copy the contents of a DVD to a VHS tape. 1. Insert the disc you wish to copy into the DVD deck and close the disc tray. 2. Insert a blank VHS video tape into the VCR deck. 3. -
Page 26: Additional Vcr Information
Additional VCR Information Additional VCR Information • During manual recording, timer recording, Instant Timer Recording, playback, or fast forward modes, the DVD+VCR automatically starts rewinding the tape at the end of the tape. The cassette stops at the beginning of the tape and is ejected. -
Page 27: Operations - Dvd
Operations - DVD Playback Setup Playback Setup Turn the TV on and select the video input source connected to this unit. Audio System: Turn the Audio System on and select the input source connected to this unit. 1. Press Z (OPEN/CLOSE) to open the disc tray. 2. -
Page 28: Additional Features
Buttons Operations RANDOM During playback or in stop mode, press RANDOM for ran- dom playback. TITLE If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appears. DISC MENU The disc menu appears on the screen. ANGLE During playback of DVD disc contains scenes recorded different camera angles, press ANGLE repeatedly to... -
Page 29: Playing An Audio Cd Or Mp3/Wma Disc
Playing an Audio CD or Playing an Audio CD or MP3/WMA file MP3/WMA file This unit can play Audio CDs or MP3/WMA files recorded media. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recorded media or Audio CD, a menu appears on the TV screen. Press v / V to select a track/file then press PLAY or ENTER (OK) and playback starts. -
Page 30: Viewing A Jpeg Disc
iewing a JPEG Disc iewing a JPEG Disc Using this DVD+VCR you can view discs with JPEG files. 1. Insert a disc and close the tray. The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder, and press ENTER (OK). -
Page 31: Playing A Divx Movie File
Playing a DivX Movie file Playing a DivX Movie file Using this DVD+VCR, you can play DivX file. 1. Insert a DivX file recorded media. The MOVIE menu appears on the TV screen. 2. Press v / V to select a folder, and press . A list of files in the folder appears. -
Page 32: Playing A Dvd Vr Format Disc
Playing a DVD VR format Playing a DVD VR format Disc Disc This unit will play DVD-R/RW discs recorded using the DVD-Video format that have been finalized using a DVD-recorder. • This unit will play DVD-RW discs recorded using the Video Recording (VR) format. 1. -
Page 33: Reference
Reference Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code Language Abkhazian 6566 Fiji Afar 6565 Finnish Afrikaans 6570 French Albanian 8381 Frisian Ameharic 6577 Galician Arabic 6582 Georgian... -
Page 34: Troubleshooting
roubleshooting roubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom The power cord is disconnected. No power. The power is on, but DVD or VCR button is not switched the DVD+VCR does properly. not work. - Page 35 Symptom An unplayable disc is inserted. The DVD+VCR does not start playback. The disc is placed upside down. The disc is not placed within the guide. The disc is dirty. The Rating level is set. Is the cassette compartment empty? Video tape cannot be inserted.
-
Page 36: Specifications
Specifications Specifications General Power requirements Power consumption Dimensions (approx.) Weight (approx.) Operating temperature Operating humidity Signal system Inputs ANTENNA IN VHS VIDEO IN(LINE1, 2) VHS AUDIO IN(LINE1, 2) Outputs VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1 (PROGRESSIVE SCAN) Audio output (digital audio) Audio output (analog audio) - Page 37 0608SKMLGEEGL...