Manual Channel Set - JVC HR-XVS20EK Instructions Manual

80

Manual Channel Set

Store channels that were not stored during Auto Set Up
( pg. 16), Preset Download (
( pg. 78).
A
Access the Main Menu screen.
Press SET UP MENU.
B
Access the Confirmation screen.
Press rt to move the highlight bar (pointer) to
"MANUAL CH SET", then press OK or e. The
Confirmation screen appears.
C
Select the channel position.
Press rt w e until an open
position in which you want to
store a channel begins
blinking, then press OK. The
Manual Channel Set screen
appears.
pg. 18) or Auto Channel Set
(Example) To store in position 6.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
SUBSIDIARY SETTINGS (cont.)
D
Select the band.
Press rt to change the
band between CH (regular)
and CC (cable), then press e.
E
Input the channel.
Press the number keys to input the channel number you
want to store.
Input "0" before any single number entries.
To input the registered station name (ID –
until "– – – –" (ID setting) begins blinking, then press rt.
For fine tuning adjustment, press e until "+/–" begins blinking,
then press rt. While tuning, "+" or "–" appears.
When "L-2 SELECT" is set to "A/V" or "SAT", the "DECODER"
setting cannot be changed. (
F
Enter new channel information.
Press OK and the Confirmation screen appears.
Repeat steps C – F as necessary.
G
Close the Confirmation screen.
Press SET UP MENU.
To change positions, see "Change Station Channel Position"
( pg. 81).
If you wish to set station names other than the ones registered
in your unit, see "Set Stations (B)" (
ATTENTION
Guide Program numbers are not set when channels are
stored manually. ( pg. 32, "VIDEO Plus+
Programming")
pg. 84), press e
pg. 63)
pg. 83).
Timer
®