Timer Recording On Vhs Deck; Vcr Plus+ Timer Programming - JVC DR-MX1S Instructions Manual

TIMER RECORDING ON VHS DECK

60
EN
®
VCR Plus+ Timer Programming
You can program this unit to timer-record as many as 8 programs.
With the VCR Plus+ system, timer programming is greatly
simplified because each TV program has a corresponding code
number which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
Make sure that the unit's built-in clock is set properly.
Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
VHS TIMER
VHS
CANCEL
rt
REC MODE
1
Load a cassette with the record safety tab intact.
2
Press VHS so that the VHS lamp lights up on the unit.
3
Press PROGRAM to access the
Program screen.
4
Press rt to select "VCR
PLUS+ PRGM", then press
ENTER.
5
Press the number keys to enter
the PlusCode number of a program
you wish to record, then press
ENTER.
If you have made a mistake, press
CANCEL and input the correct
number before you press ENTER.
If the number you entered is invalid,
"ERROR" appears on the TV
screen and "Err" appears on the front display panel.
Press CANCEL and input a valid PlusCode number.
6
The PlusCode number you
entered and the matching timer-
recording information are displayed
on the TV screen. Check the
program data.
To cancel this setting, press
PROGRAM.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see "Changing VCR Plus+
set the Guide Channel number correctly.
CABLE/DBS
TV DVD
0-9
PROGRAM
ENTER
PROGRAM
VCR PLUS+ PRGM
PROGRAM / CONFIRM
R,T THEN (ENTER)
(PROGRAM) TO END
PLUSCODE NO.
PRESS NUMBER KEY (0–9)
PRESS (PROGRAM) TO END
VCR PLUS+ SYSTEM
PROGRAM 1
(PLUSCODE NO. 12345678)
START STOP
12:00 AM 1:00 AM
DATE CH SP/EP
1/ 30/04 15 SP
PRESS (8=DAILY, 9=WEEKLY
R/T, REC MODE), THEN (ENTER)
(PROGRAM) TO END
®
Setting" ( pg. 86) and
7
Press REC MODE to select the desired recording mode.
8
Press ENTER to complete timer programming.
To program another timer, repeat steps 3-8.
If "PROGRAM NOT COMPLETED PROGRAM OVERLAP" appears
on the TV screen, see page 62.
9
Press VHS TIMER to engage the unit's timer mode. The VHS
recording lamp lights up on the unit and the HDD or DVD deck is
automatically selected. When the HDD or DVD deck is in timer
standby mode, the unit is automatically turned off.
To disengage the timer mode, press VHS TIMER again.
IMPORTANT:
If you have moved to a different area or if a broadcasting station
channel number has been changed, the wrong channel number will
be displayed on the VCR Plus+ program screen in step 6. When this
happens, set the correct Guide Channel number for that station.
( pg. 86, "Changing VCR Plus+
NOTES:
To Timer-Record Weekly Or Daily Serials:
in step 6, press number key "9" for weekly serials or number key
—
"8" for daily serials (Monday - Friday). Either "WEEKLY" or "DAILY"
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
You can program this unit to timer-record as many as 8 programs. If
you try to program the unit to record a ninth, "PROGRAM FULL"
appears on the TV screen and "FULL" appears on the front display
panel. To record the extra program, you must first cancel any
unnecessary programs. (
To record the programs received by cable box or DBS receiver,
record on the HDD or the DVD discs. For details, refer to "VCR Plus+
3
C ® Timer Programming" (
®
Setting")
pg. 62)
pg. 55).
' s