Toshiba RAS-10G2KVP-E Service Manual page 106

No. Part name
BUSH-BODY(R)
2
BUSH-BODY(L)
3
Electric parts
4
box assembly.
Work procedure
1) Push the bottom of part and slide to the
right side.
1) Push the bottom of part and slide to the
left side.
<Point to note during re-assemble
Front panel>
- Please make sure that the claw of Front-
panel insert below edge of ASM-FRAME.
- Hooks in left and right side must be
install to lock position
1) Stop operation of the air conditioner and
turn off its main power supply.
2) Open the air inlet grill, push the arm toward
the outside, and remove the grille.
3) Remove the fixing screw at
PANEL-FR(R) 3pcs and at PLATE-DECO
3 pcs following picture then pull out
PANEL-FR (R)
4) Remove a fixing screw and Cover-
connector assembly, then remove Power-
supply cord after already remove fixing-
screws(2pcs.) at cord-clamp.
5) Remove the fixing screw that secure
the cover electric box, then remove
cover electric box toward right side.
6) Remove the screws of Earth-lead that
fixing at the electronic box.
BUSH-BODY(L)
–
− 105
FILE NO. SVM-14017
Remarks
BUSH-BODY(R)
The claw of Front panel must
be lower ASM-FRAME
Hook must be install
to lock position
Left side
Right side
Fixing screw
3 Screws
3 Screws
Cover electric box
Fixing screw
Earth screw