Electrical Considerations; Unpack Shipping Carton - VeriFone PINpad 1000SE Installation Manual

S
ETUP

Unpack Shipping Carton

Electrical
Considerations
Unpack
Shipping Carton
CAUTION
WARNING
10
PIN 1000 I
PAD SE NSTALLATION
•
Avoid using this product during electrical storms.
•
Avoid locations near electrical appliances or other devices that cause
excessive voltage fluctuations or emit electrical noise (for example, air
conditioners, electric motors, neon signs, high-frequency or magnetic security
devices, or computer equipment).
•
Do not use the PINpad 1000
•
Disconnect the device from its POS terminal before cleaning.
Carefully inspect the shipping carton and its content for possible tampering or
damage.
The PINpad 1000 is a secure product and any tampering can cause it to cease
SE
to function or operate in an unsecured manner.
1
Remove the PINpad 1000
2
Remove any protective plastic wrap and place the unit on a table or
countertop.
3
Remove the clear protective film from the display.
4
Replace all the packing materials, close the lid, and save the carton for
repacking or moving the PINpad 1000
Do not use a unit that has been tampered with or otherwise damaged.
The PINpad 1000 comes equipped with tamper-evident label. If a label or
SE
component appears damaged, immediately notify the shipping company and your
VeriFone representative or service provider immediately.
G
UIDE
unit water or in moist conditions.
SE
from the shipping carton.
SE
in the future.
SE