Overview - D-Link DWL-3500AP Configuration Manual

4.1

Overview

The following tables show a summary of the interfaces on the devices you configure,
along with their IP address and port information as well as the VLANs, DHCP pools, etc.
This configuration starts from scratch and therefore you should clear the configuration on
the WLAN switches from the previous scenarios.
Interface/Device
WS1 Management
Interface
WS1 Loopback Interface
WS1 L3 Tunnel Interface
WS1 L3 Tunnel Interface
WS1 L3 Tunnel Interface
WS1 Interface to L3
Device
L3 Device Interface to
WS1
WS2 Management
Interface
WS2 Loopback Interface
WS2 L3 Tunnel Interface
WS2 L3 Tunnel Interface
WS2 L3 Tunnel Interface
WS2 Interface to L3
Device
L3 Device Interface to
WS2
FTP or other Server on
WS1
RADIUS Server on WS2
AP1 on WS1
AP2 on WS2
DHCP for Clients on
Guest SSID
DHCP for Clients on D-
LINK-NET1 SSID
DHCP Clients on D-
LINK-NET2 SSID
VLAN ID/Name IP Address
NA 10.90.90.90/8
NA 192.168.10.250/32
2 - RD 192.168.2.254/24
3 - Sales 192.168.3.254/24
100 - Guest 192.168.100.254/24 Logical only
10 - Core 172.17.5.253/24
NA 172.17.5.254/24
NA 10.90.90.91/24
NA 192.168.20.250/32
2 - RD 192.168.2.253/24
3 - Sales 192.168.3.253/24
100 - Guest 192.168.100.253/24 Logical only
10 - Core 172.17.6.253/24
NA 172.17.6.254/24
5 - Server 192.168.5.254/24
192.168.5.x/24 for
server
4 - Server 192.168.4.254/24
192.168.4.x/24 for
server
101 – AP1 192.168.101.254/24
192.168.101.x/24
for AP
102 – AP2 192.168.102.254/24
192.168.102.x/24
for AP
NA 192.168.100.x/24
NA 192.168.2.x/24
NA 192.168.3.x/24
Port
Any unused L2
port
Logical only
Logical only
Logical only
0/24
L3 device port
Any unused
Logical only
Logical only
Logical only
0/24
L3 device port
0/13
0/13
0/1
0/1
Wireless
Wireless
Wireless