D-Link DWL-3500AP Configuration Manual page 21

1. From the LAN tab on the switch Web interface, click L2 Features
Configuration.
2. Select Create from VLAN ID and Name pull down menu.
3. Enter the VLAN ID.
4. Enter VLAN Name.
5.
On the Slot/Port row for the port to include in the VLAN, select Include from the
Participation drop-down menu.
6.
For VLAN 100 and VLAN 200, select Tagging from the drop-down menu for port 0/1
and 0/13. This configuration tells the switch to add an 802.1Q VLAN Tag to the packets
that egress the port on those VLANs. This is so that the AP knows which Network (or
SSID) to forward the traffic on.
7.
Click Submit.
8.
Repeat for each of the VLANs in the above table.
Configure the Port VLAN ID for ports 0/1 and 0/13.
1.
From the LAN tab on the switch Web interface, click L2 Features
Configuration.
2.
Select port 0/1 from the Slot/Port drop-down menu.
3.
Enter 20 in the Port VLAN ID field.
4.
Click Submit.
5.
Select port 0/13 from the Slot/Port drop-down menu.
6.
Enter 30 in the Port VLAN ID field.
7.
Click Submit.
VLAN VLAN
VLAN Port