External Rtp Port; Channel 1-3; System; Web Language - Panasonic KX-TGP500 Administrator's Manual

3.4.5.3 External RTP Port

Channel 1–3
Description
Value Range
Default Value

3.5 System

This section provides detailed descriptions about all the settings classified under the [System] tab.

3.5.1 Web Language

This screen allows you to select the language used for the Web user interface. The language setting is only
applicable when you log in to the Web user interface as User.
Note
•
If you change the language while logged in to the Web user interface with the User account, the
language will be changed after the message "Complete" is displayed. If you are logged in with the
Administrator account, the language will be changed when a user logs in to the Web user interface as
User.
•
The language used for the Web user interface for the Administrator account is always English.
•
The language used for the handsets (or the base unit [KX-TGP55x only]) remains unchanged even if
the language for the Web user interface is changed.
Document Version 2013-02
Specifies the external RTP port number used for voice communication
for each channel.
0, 1024–49150 (0: Disable, even number only)
Note
•
Each channel must be set to a unique port number, and all port
numbers must be an even number.
•
You cannot specify here the same port number as any of the
port numbers specified for the individual lines in [Source
Port] in 3.6.2.5 SIP Source Port. In addition, you cannot
specify a port number that is 1 less than a port number specified
in [Source Port] if the source port number is an odd number.
•
All 3 channels must be set to either enable or disable at the
same time.
0
3.5.1 Web Language
Administrator Guide 77