3.8.3 Provisioning Maintenance
File Name
Description
Value Range
Default Value
3.8.3 Provisioning Maintenance
This screen allows you to change the provisioning setup to download the configuration files from the
provisioning server of your phone system.
Note
•
Each unit can accept up to 3 configuration files. For details about provisioning, see
1.1.6 Provisioning.
3.8.3.1 Provisioning Maintenance
Enable Provisioning
Description
Value Range
Default Value
Configuration File Reference
126
Administrator Guide
Specifies the path of the firmware file to be imported.
No limitation
Note
•
There are no limitations for the field entry. However, it is
recommended that paths of less than 256 characters be used:
longer paths may cause longer data transfer times and result in
an internal error.
Not stored.
Selects whether the unit is automatically configured by downloading the
configuration files from the provisioning server of your phone system.
•
Yes
•
No
Yes
PROVISION_ENABLE (Page 152)
Document Version
2013-02