3.7.4 Tone Settings
3.7.4 Tone Settings
This screen allows you to configure the dual-tone frequencies and ring tone patterns of each tone.
3.7.4.1 Dial Tone
Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
Tone Timings
Description
118
Administrator Guide
Specifies the dual-tone frequencies, in hertz, of dial tones using 2 whole
numbers separated by a comma.
0, 200–1000 (0: No tone)
Note
•
If the value for this setting is "350,440", the unit will use a mixed
signal of a 350 Hz tone and a 440 Hz tone.
350,440
DIAL_TONE_FRQ (Page 180)
Specifies the pattern, in milliseconds, of dial tones using 4 whole
numbers (on 1, off 1, on 2, off 2) separated by commas.
Document Version
2013-02