Camera Views (2, 4, 8, 16); Camera Name; Camera Recording Status; Auto Playback - JVC VR-N100U User Manual

Jvc video disc recorder user manual

Hide thumbs Also See for VR-N100U:

Table of Contents

3.5.2. Camera Views (2, 4, 8, 16)

Each user may have their own preference in regards the simultaneous viewing of network cameras. Therefore, VR-N100U

allows the user to select from a 2 camera, 4 camera, 8 camera, or maximum 16 cameras to be displayed. If the maximum

number is not selected, you can switch between pages to see the other cameras. Below are a couple of screen shot examples

for the camera views (2 Cameras and 4 Cameras).

The frame surrounding each camera window may slightly vary because of the camera functionality (Fixed, PTZ, Motion, or

combo).

All cameras will display the associated name at the top. The default names will be assigned from CameraA to

CameraP which represent discovered cameras 1 to 16.

All cameras will have the current status on the lower-left corner (Continuous Recording off/on, Motion Control

off/on-if supported). By clicking this button, you can toggle between the various supported recording modes. The

default setting will be Off on all cameras as the VR-N100U administrator will setup each camera accordingly.

The page will change and prompt you to allow you to reconfirm the change in recording status.

All cameras will have the Auto Playback button located on the lower-right corner. By clicking this button, the

playback window will open up and automatically display the last minute of recorded video for that camera (if

available).

Page 36 of 98

VR-N100U USERS MANUAL

All Items Are Subject To Change Without Notice

Feb. 2004 Rev 1.0

Table of Contents