Table of Contents
Advertisement
5.2.
Network IP Cameras
VR-N100U is designed to support the latest IP cameras from JVC. Unfortunately, each make as well as model utilizes different
protocols, and offer slightly different features and functions. Therefore, camera support will be an ongoing process for VR-
N100U. Below is a list of supported IP cameras at the time this manual was published.
NOTE1: Please visit the various network camera manufacturer web sites for detail specifications and camera firmware
updates. All network cameras should have the latest available firmware and set to manufacturer's default.
Below is a list of JVC network IP cameras that are currently supported or in the process of being supported.
VN-C10U
VN-C11U
VN-C30U
Details regarding the advanced settings for the above network IP cameras supported by VR-N100U are listed below.
NOTE1: Always make sure that your JVC network cameras are flashed with the latest firmware version prior to using the
device with VR-N100U.
NOTE2: For more detail information regarding the JVC devices, please visit their web site at
http://pro.jvc.com/prof/main.jsp
Advanced Settings for VN-C10U
JVC VN-C10U Configuration (Fixed Motion Detection Network Camera)
Quality
Balance
Brightness
Backlight
Shutter
Motion
Detection
Page 72 of 98
VR-N100U USERS MANUAL
Fixed, Motion Detection
Fixed, Motion Detection
PTZ
.
Resolution
@ 160x120
Frames per
@ 320x240
Second
@ 640x480
Compression Rate
Automatic White Balance
Red Balance
Green Balance
NOTE: RED & GREEN gains are only applicable if Automatic WHITE is OFF
Automatic Gain Control
Saturation
Backlight Compensation
Backlight Compensation Area
Shutter Speed
All Items Are Subject To Change Without Notice
Supported
Supported
Supported
160x120, 320x240, 640x480
Max 30 fps
Max 30 fps
Max 8 fps
www.jvc.com
or
Feb. 2004 Rev 1.0
Advertisement
Table of Contents
